Wearable Liquid Metal Composite with Skin-Adhesive Chitosan–Alginate–Chitosan Hydrogel for Stable Electromyogram Signal Monitoring
Polymers · 07.09.2023 · 15 (18) · 3692
DOI: 10.3390/polym15183692 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 07.09.2023. Verfasst von Jaehyon Kim und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Institute of Information & communications Technology Planning & Evaluation, Ministry of Science and ICT.
Abstract (Originalsprache)
In wearable bioelectronics, various studies have focused on enhancing prosthetic control accuracy by improving the quality of physiological signals. The fabrication of conductive composites through the addition of metal fillers is one way to achieve stretchability, conductivity, and biocompatibility. However, it is difficult to measure stable biological signals using these soft electronics during physical activities because of the slipping issues of the devices, which results in the inaccurate placement of the device at the target part of the body. To address these limitations, it is necessary to reduce the stiffness of the conductive materials and enhance the adhesion between the device and the skin. In this study, we measured the electromyography (EMG) signals by applying a three-layered hydrogel structure composed of chitosan–alginate–chitosan (CAC) to a stretchable electrode fabricated using a composite of styrene–ethylene–butylene–styrene and eutectic gallium-indium. We observed stable adhesion of the CAC hydrogel to the skin, which aided in keeping the electrode attached to the skin during the subject movement. Finally, we fabricated a multichannel array of CAC-coated composite electrodes (CACCE) to demonstrate the accurate classification of the EMG signals based on hand movements and channel placement, which was followed by the movement of the robot arm.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea.
- Department of Intelligent Precision Healthcare Convergence, Sungkyunkwan University, Suwon 16419, Republic of Korea.
- Department of Biomedical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea.
- Department of Superintelligence Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea.
ORCID-Profile: Mikyung Shin, Donghee Son
Förderung
- National Research Foundation of Korea
- Institute of Information & communications Technology Planning & Evaluation
- Ministry of Science and ICT
- Institute of Information and Communications Technology Planning and Evaluation (IITP)
Zitieren
APA
Kim, J., Kim, Y., Lee, J., Shin, M., & Son, D. (2023). Wearable Liquid Metal Composite with Skin-Adhesive Chitosan–Alginate–Chitosan Hydrogel for Stable Electromyogram Signal Monitoring. Polymers, 15(18), 3692. https://doi.org/10.3390/polym15183692
Vancouver
Kim J, Kim Y, Lee J, Shin M, Son D. Wearable Liquid Metal Composite with Skin-Adhesive Chitosan–Alginate–Chitosan Hydrogel for Stable Electromyogram Signal Monitoring. Polymers. 2023;15(18):3692. doi:10.3390/polym15183692
BibTeX
@article{Kim2023,
author = {Kim, Jaehyon and Kim, Yewon and Lee, Jaebeom and Shin, Mikyung and Son, Donghee},
title = {Wearable Liquid Metal Composite with Skin-Adhesive Chitosan–Alginate–Chitosan Hydrogel for Stable Electromyogram Signal Monitoring},
journal = {Polymers},
year = {2023},
volume = {15},
number = {18},
pages = {3692},
doi = {10.3390/polym15183692}
}
EUVIMED