Research Status of and Prospects for 3D Printing for Continuous Fiber-Reinforced Thermoplastic Composites
Polymers · 04.09.2023 · 15 (17) · 3653
DOI: 10.3390/polym15173653 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 04.09.2023. Verfasst von Yuan Yang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Manufacturing Equipment of Shaanxi Province, Xi'an University of Technology, Xi'an 710048, China. Die Arbeit wurde bisher 52-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Special Scientific Research Project of Shaanxi Education Department.
Abstract (Originalsprache)
Continuous fiber-reinforced thermoplastic composites (CFRTPCs) have advantages such as high specific strength, high specific modulus, corrosion resistance, and recyclability and are widely used in the fields of aerospace, rail transit, new energy, and so on. However, traditional methods for preparing CFRTPCs, such as placement and molding, rely more on forming molds, resulting in high manufacturing costs and a slow response speed, which limits the promotion and application of the new generation of CFRTPCs with complex configurations and designable performance. Three-dimensional printing can efficiently create products with multiple materials, complex structures, and integrated functions, introducing new ways and opportunities for the manufacturing of CFRTPCs. However, poor mechanical properties are the bottleneck problem in achieving 3D printing of CFRTPCs. This paper summarizes the research status of the fused deposition modeling (FDM) 3D printing process and the corresponding mechanical properties of CFRTPCs. The focus is on analyzing the influences of the FDM process parameters, such as the material type, printing temperature, speed parameters, layer thickness, scanning space, stacking direction, and fiber volume content, on the mechanical properties of CFRTPCs. Finally, the main problems and future prospects of current CFRTPCs-FDM are analyzed and forecasted, providing new references and ideas for 3D printing of high-performance CFRTPCs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Manufacturing Equipment of Shaanxi Province, Xi'an University of Technology, Xi'an 710048, China.
- School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an 710072, China.
ORCID-Profile: Yuan Yang
Förderung
- Special Scientific Research Project of Shaanxi Education Department
Zitieren
APA
Yang, Y., Yang, B., Chang, Z., Duan, J., & Chen, W. (2023). Research Status of and Prospects for 3D Printing for Continuous Fiber-Reinforced Thermoplastic Composites. Polymers, 15(17), 3653. https://doi.org/10.3390/polym15173653
Vancouver
Yang Y, Yang B, Chang Z, Duan J, Chen W. Research Status of and Prospects for 3D Printing for Continuous Fiber-Reinforced Thermoplastic Composites. Polymers. 2023;15(17):3653. doi:10.3390/polym15173653
BibTeX
@article{Yang2023,
author = {Yang, Yuan and Yang, Bo and Chang, Zhengping and Duan, Jihao and Chen, Weihua},
title = {Research Status of and Prospects for 3D Printing for Continuous Fiber-Reinforced Thermoplastic Composites},
journal = {Polymers},
year = {2023},
volume = {15},
number = {17},
pages = {3653},
doi = {10.3390/polym15173653}
}
EUVIMED