EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Characterization of a One-Step Electrospun Poly(Lactic Acid)/Wormwood Oil Antibacterial Nanofiber Membrane

Xiaoyan Tang iD, Xun Guo, Yongchao Duo, Xiaoming Qian

Polymers · 29.08.2023 · 15 (17) · 3585

DOI: 10.3390/polym15173585 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 29.08.2023. Verfasst von Xiaoyan Tang und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the continuous improvement of the standard of living, people are increasingly inclined towards natural, green, and environmentally friendly products. Plant-based products that are safe, natural, non-toxic, and beneficial to human health are often more favored. Poly(lactic acid) (PLA) is a polymer obtained through lactate polymerization using renewable plant resources such as corn and has excellent biocompatibility and biodegradability. It is widely used in the field of food packaging. Wormwood oil (WO) is an oil extracted from the stems and leaves of Artemisia plants, and it has broad-spectrum antibacterial properties. In this article, through electrospinning technology, wormwood oil was directly incorporated into PLA, giving the PLA nanofiber membrane antioxidant and antibacterial functions. Various parameters such as voltage (11 KV, 13 KV, 15 KV), spinning solution concentration (8%, 10%, 12%), distance (15 cm, 17 cm, 19 cm), and feeding rate (0.4 mL/h, 0.5 mL/h, 0.6 mL/h) were explored, and the resulting spun fibers were characterized. Through SEM characterization, it was found that when the spinning voltage was 13 KV, the spinning solution concentration was 10%, the distance was 17 cm, and the feeding rate was 0.5 mL/h, the nanofiber membrane had a smooth morphology without bead formation, with an average diameter of 260 nm. The nanofiber membrane was characterized using FTIR, TG, and SEM, confirming the successful incorporation of artemisia essential oil into PLA. The prepared antimicrobial nanofilm was subjected to antimicrobial testing, and the results showed that as the concentration of the essential oil increased, the inhibition zones also increased. When wormwood oil concentration was 4%, the diameter of the inhibition zone for Staphylococcus aureus increased from 1.0 mm to 3.5 mm, while the diameter of the inhibition zone for Escherichia coli increased from 2.0 mm to 4.5 mm.

Schlagwörter

Stichwörter der Autor:innen

electrospinningnanofibernatural antimicrobialpoly(lactic acid)wormwood oil

Autor:innen und Institutionen

  • School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China.

ORCID-Profile: Xiaoyan Tang

Zitieren

APA

Tang, X., Guo, X., Duo, Y., & Qian, X. (2023). Preparation and Characterization of a One-Step Electrospun Poly(Lactic Acid)/Wormwood Oil Antibacterial Nanofiber Membrane. Polymers, 15(17), 3585. https://doi.org/10.3390/polym15173585

Vancouver

Tang X, Guo X, Duo Y, Qian X. Preparation and Characterization of a One-Step Electrospun Poly(Lactic Acid)/Wormwood Oil Antibacterial Nanofiber Membrane. Polymers. 2023;15(17):3585. doi:10.3390/polym15173585

BibTeX
@article{Tang2023,
  author = {Tang, Xiaoyan and Guo, Xun and Duo, Yongchao and Qian, Xiaoming},
  title = {Preparation and Characterization of a One-Step Electrospun Poly(Lactic Acid)/Wormwood Oil Antibacterial Nanofiber Membrane},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {17},
  pages = {3585},
  doi = {10.3390/polym15173585}
}
Kostenlos starten →