Free-Standing CNT Film for Interlaminar Toughening: Insight into Infiltration and Thickness Effects
Polymers · 29.08.2023 · 15 (17) · 3579
DOI: 10.3390/polym15173579 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 29.08.2023. Verfasst von Anran Fu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institut…. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Natural Science Foundation of Ningbo, the Leading Innovative and Entrepreneur Team Introduction Program of Zhejiang, the Ningbo Yongjiang Talent Introduction Programme.
Abstract (Originalsprache)
Carbon fiber reinforced polymer composites have the advantages of being lightweight, having high strength and designability, and having been extensively used. However, the interlaminar toughness and delamination resistance of these composites are relatively poor due to their laminated structure and intrinsic brittleness of resin matrix. In this paper, commercialized free-standing carbon nanotube (CNT) films, drawn from CNT forests, were used to toughen the interlaminar interfaces of the composites. The effects of resin infiltration state and thickness of CNT films on the interlaminar toughening effect were systematically investigated. The results show that the pre-infiltration treatment of CNT films with acetone diluted epoxy resin solution can effectively improve the degree of resin infiltration. Compared with the samples containing untreated CNT film, the Mode I and Mode II interlaminar fracture toughness of the treated samples were significantly improved. The GIC reached a maximum of 1412.42 J/m2 at a CNT film thickness of 5 µm, which was about 61.38% higher than that of the baseline. At a CNT film thickness of 15 µm, the GIIC reached a maximum value of 983.73 J/m2, approximately 67.58% higher than that of the baseline. The corresponding toughening mechanisms were also systematically analyzed.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences…
- School of Chemical Sciences, University of Chinese Academy of Sciences, Beijing 100049, China.
- School of Material Science and Engineering, Shanghai University, Shanghai 200444, China.
- College of Materials Science and Opto-Electronic Technology, University of Chinese Academy of Sciences, Beijing 100049, China.
ORCID-Profile: Yunfu Ou
Förderung
- the Natural Science Foundation of Ningbo
- the Leading Innovative and Entrepreneur Team Introduction Program of Zhejiang
- the Ningbo Yongjiang Talent Introduction Programme
- the China Postdoctoral Science Foundation
- Leading Innovative and Entrepreneur Team Introduction Program of Zhejiang
- Ningbo Yongjiang Talent Introduction Programme
- Natural Science Foundation of Ningbo
- fellowship of China Postdoctoral Science Foundation
Zitieren
APA
Fu, A., Ou, Y., Wu, L., Zhang, Y., Weng, Y., & Mao, D. (2023). Free-Standing CNT Film for Interlaminar Toughening: Insight into Infiltration and Thickness Effects. Polymers, 15(17), 3579. https://doi.org/10.3390/polym15173579
Vancouver
Fu A, Ou Y, Wu L, Zhang Y, Weng Y, Mao D. Free-Standing CNT Film for Interlaminar Toughening: Insight into Infiltration and Thickness Effects. Polymers. 2023;15(17):3579. doi:10.3390/polym15173579
BibTeX
@article{Fu2023,
author = {Fu, Anran and Ou, Yunfu and Wu, Longqiang and Zhang, Yunxiao and Weng, Yiting and Mao, Dongsheng},
title = {Free-Standing CNT Film for Interlaminar Toughening: Insight into Infiltration and Thickness Effects},
journal = {Polymers},
year = {2023},
volume = {15},
number = {17},
pages = {3579},
doi = {10.3390/polym15173579}
}
EUVIMED