EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Morphological Characterization and Failure Analysis of the Ultrasonic Welded Single-Lap Joints

Quanyue Zhao, Hantai Wu, Xinyu Chen, Xiaoxuan Chen, Shuaiheng Xu, Chunwang He, Tian Zhao

Polymers · 26.08.2023 · 15 (17) · 3555

DOI: 10.3390/polym15173555 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 26.08.2023. Verfasst von Quanyue Zhao und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Advanced Structure Technology, Beijing Institute of Technology, Beijing 100081, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Aviation Scientific Fund, China Postdoctoral Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ultrasonic welding technology represents an advanced method for joining thermoplastic composites. However, there exists a scarcity of systematic investigations into welding parameters and their influence on the morphological characteristics and quality of the welded regions. Furthermore, a comprehensive experimental understanding of the welded joint failure mechanisms remains deficient. A robust model for simulating the failure behavior of welded joints under loading has yet to be formulated. In this study, ultrasonic welded specimens were fabricated using distinct welding control methods and varied parameter combinations. Diverse experimental methodologies are employed to assess the morphological features of the welded areas, ascertain specimen strength, and observe welding interface failure modes. Based on a cohesive model, a finite element model is developed to predict the strength of the ultrasonic welded joints and elucidate the failure mechanisms. The results showed that, under identical welding parameters, the specimens welded with a high amplitude and low welding force exhibit superior welding quality. The specimens produced under displacement control exhibit minimal dispersion in strength. The proposed finite element model effectively prognosticates both welded joint strength and failure modes.

Schlagwörter

Stichwörter der Autor:innen

damage mechanicsfinite element analysis (FEA)thermoplastic compositesultrasonic welding

Autor:innen und Institutionen

  • Institute of Advanced Structure Technology, Beijing Institute of Technology, Beijing 100081, China.
  • State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China.

Förderung

  • National Natural Science Foundation of China
  • Aviation Scientific Fund
  • China Postdoctoral Science Foundation
  • Beijing Institute of Technology Research Fund Program

Zitieren

APA

Zhao, Q., Wu, H., Chen, X., Chen, X., Xu, S., He, C., & Zhao, T. (2023). Morphological Characterization and Failure Analysis of the Ultrasonic Welded Single-Lap Joints. Polymers, 15(17), 3555. https://doi.org/10.3390/polym15173555

Vancouver

Zhao Q, Wu H, Chen X, Chen X, Xu S, He C, et al. Morphological Characterization and Failure Analysis of the Ultrasonic Welded Single-Lap Joints. Polymers. 2023;15(17):3555. doi:10.3390/polym15173555

BibTeX
@article{Zhao2023,
  author = {Zhao, Quanyue and Wu, Hantai and Chen, Xinyu and Chen, Xiaoxuan and Xu, Shuaiheng and He, Chunwang and Zhao, Tian},
  title = {Morphological Characterization and Failure Analysis of the Ultrasonic Welded Single-Lap Joints},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {17},
  pages = {3555},
  doi = {10.3390/polym15173555}
}
Kostenlos starten →