Adsorption of Methylene Blue Dye by Cetyltrimethylammonium Bromide Intercalated Polyaniline-Functionalized Montmorillonite Clay Nanocomposite: Kinetics, Isotherms, and Mechanism Study
Polymers · 23.08.2023 · 15 (17) · 3518
DOI: 10.3390/polym15173518 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 23.08.2023. Verfasst von Naima Mennas und 4 weiteren Autor:innen. Beteiligte Einrichtung: Water Science and Technology Laboratory, University of Mustapha Stambouli Mascara, Mascara 29000, Algeria. Die Arbeit wurde bisher 61-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In this study, new adsorbents were prepared by modifying a montmorillonite clay (Mt) with cethyltrimethyl ammonium bromide (CTAB) to form CTAB-Mt, followed by a second modification process with polyaniline (PAni) to form PAni@CTAB-Mt by in situ polymerization of aniline. X-ray diffraction (XRD), X-ray fluorescence spectroscopy (XRF), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), transmission electron microscopy (TEM), cyclic voltammetry (CV) and the Brunauer–Emmett–Teller (BET) technique were used to characterize the samples. These adsorbents were used in a batch process to remove methylene blue (MB) from aqueous solution. Factors investigated included initial pH of the solution, contact time and temperature. The adsorption data fit the Freundlich isotherm better than the Langmuir and Temkin isotherms. The maximum adsorption capacities (qeq) obtained were 108.82 mg·g−1, 71.20 mg·g−1 and 57.36 mg·g−1 for PAni@CTAB-Mt, CTAB-Mt and Mt, respectively. The enhanced adsorption capability of the hybrid material is due to increase in surface area and pore volume of the PAni@CTAB-Mt adsorbent. The adsorption results were found to fit well with the pseudo-second-order kinetics model, with highest correlation coefficient (R2) values of 0.954, 0.942 and 0.958 for Mt, CTAB-Mt and PAni@CTAB-Mt adsorbents, respectively. The pH and temperature had a significant effect on the adsorption process, and the negative values of ΔG suggest that the adsorption process was spontaneous and feasible. The desorption and reusability experiment indicated that PAni@CTAB-Mt has the potential to be a reusable adsorbent for MB removal.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Water Science and Technology Laboratory, University of Mustapha Stambouli Mascara, Mascara 29000, Algeria.
- Laboratory of Physico-Chemical Studies, University of Saïda, BP 138, Saïda 20000, Algeria.
- Faculty of Science and Technology, University of Mustapha Stambouli Mascara, Mascara 29000, Algeria.
- Department of Clothing Technology and Manufacturing Engineering, Berlin University of Applied Sciences-HTW Berlin, 12459 Berlin, Germany.
ORCID-Profile: Lilia Sabantina, Abdelghani Benyoucef
Zitieren
APA
Mennas, N., Lahreche, S., Chouli, F., Sabantina, L., & Benyoucef, A. (2023). Adsorption of Methylene Blue Dye by Cetyltrimethylammonium Bromide Intercalated Polyaniline-Functionalized Montmorillonite Clay Nanocomposite: Kinetics, Isotherms, and Mechanism Study. Polymers, 15(17), 3518. https://doi.org/10.3390/polym15173518
Vancouver
Mennas N, Lahreche S, Chouli F, Sabantina L, Benyoucef A. Adsorption of Methylene Blue Dye by Cetyltrimethylammonium Bromide Intercalated Polyaniline-Functionalized Montmorillonite Clay Nanocomposite: Kinetics, Isotherms, and Mechanism Study. Polymers. 2023;15(17):3518. doi:10.3390/polym15173518
BibTeX
@article{Mennas2023,
author = {Mennas, Naima and Lahreche, Saadia and Chouli, Faiza and Sabantina, Lilia and Benyoucef, Abdelghani},
title = {Adsorption of Methylene Blue Dye by Cetyltrimethylammonium Bromide Intercalated Polyaniline-Functionalized Montmorillonite Clay Nanocomposite: Kinetics, Isotherms, and Mechanism Study},
journal = {Polymers},
year = {2023},
volume = {15},
number = {17},
pages = {3518},
doi = {10.3390/polym15173518}
}
EUVIMED