EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cellulose Nanocrystal Embedded Composite Foam and Its Carbonization for Energy Application

So Yeon Ahn, Chengbin Yu iD, Young Seok Song

Polymers · 18.08.2023 · 15 (16) · 3454

DOI: 10.3390/polym15163454 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 18.08.2023. Verfasst von So Yeon Ahn und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Fiber Convergence Materials Engineering, Dankook University, Jukjeon-dong, Yongin 16890, Republic of Korea. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, we fabricated a cellulose nanocrystal (CNC)-embedded aerogel-like chitosan foam and carbonized the 3D foam for electrical energy harvesting. The nanocrystal-supported cellulose foam can demonstrate a high surface area and porosity, homogeneous size ranging from various microscales, and a high quality of absorbing external additives. In order to prepare CNC, microcrystalline cellulose (MCC) was chemically treated with sulfuric acid. The CNC incorporates into chitosan, enhancing mechanical properties, crystallization, and generation of the aerogel-like porous structure. The weight percentage of the CNC was 2 wt% in the chitosan composite. The CNC/chitosan foam is produced using the freeze-drying method, and the CNC-embedded CNC/chitosan foam has been carbonized. We found that the degree of crystallization of carbon structure increased, including the CNCs. Both CNC and chitosan are degradable materials when CNC includes chitosan, which can form a high surface area with some typical surface-related morphology. The electrical cyclic voltammetric result shows that the vertical composite specimen had superior electrochemical properties compared to the horizontal composite specimen. In addition, the BET measurement indicated that the CNC/chitosan foam possessed a high porosity, especially mesopores with layer structures. At the same time, the carbonized CNC led to a significant increase in the portion of micropore.

Schlagwörter

Stichwörter der Autor:innen

carbonized structurecellulose nanocrystalchitosanvoltammetric

Autor:innen und Institutionen

  • Department of Fiber Convergence Materials Engineering, Dankook University, Jukjeon-dong, Yongin 16890, Republic of Korea.
  • Research Institute of Advanced Materials (RIAM), Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of Korea.

ORCID-Profile: Chengbin Yu

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Ahn, S. Y., Yu, C., & Song, Y. S. (2023). Cellulose Nanocrystal Embedded Composite Foam and Its Carbonization for Energy Application. Polymers, 15(16), 3454. https://doi.org/10.3390/polym15163454

Vancouver

Ahn SY, Yu C, Song YS. Cellulose Nanocrystal Embedded Composite Foam and Its Carbonization for Energy Application. Polymers. 2023;15(16):3454. doi:10.3390/polym15163454

BibTeX
@article{Ahn2023,
  author = {Ahn, So Yeon and Yu, Chengbin and Song, Young Seok},
  title = {Cellulose Nanocrystal Embedded Composite Foam and Its Carbonization for Energy Application},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {16},
  pages = {3454},
  doi = {10.3390/polym15163454}
}
Kostenlos starten →