EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Fluorosilicone Rubber on Mechanical Properties, Dielectric Breakdown Strength and Hydrophobicity of Methyl Vinyl Silicone Rubber

Zhaoyang Wang, Yankai Lin, Zhanxu Li, Yumeng Yang, Jun Lin, Shaojian He iD

Polymers · 18.08.2023 · 15 (16) · 3448

DOI: 10.3390/polym15163448 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 18.08.2023. Verfasst von Zhaoyang Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University, Beijing 102206, China. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Silicone rubber (SIR) is used in high-voltage insulators because of its insulation, and excellent hydrophobicity is very important in harsh outdoor environments. To enhance the hydrophobicity and low-temperature resistance of silicone rubber, methyl vinyl silicone rubber and fluorosilicone rubber (FSIR) blend composites with different ratios were prepared. The samples were characterized and analyzed using scanning electron microscopy, tensile testing, dynamic mechanical analysis and static contact angle testing. The results showed that after blending, SIR and FSIR were well compatible. FSIR had higher elastic modulus and reduced the tensile strength to some extent in SIR/FSIR composites. The addition of a small amount of FSIR made its crystallization temperature decrease from −30 to −45 °C, meaning that the low-temperature resistance was significantly improved. The breakdown strength of SIR/FSIR composites can still be maintained at a high level when a small amount of FSIR is added. The contact angle of the composites increased from 108.9 to 115.8° with the increase in FSIR content, indicating the enhanced hydrophobicity. When the samples were immersed in water for 96 h, the hydrophobicity migration phenomenon occurred. The static contact angle of the samples with less FSIR content had a weaker decreasing trend, which illustrated that the hydrophobicity was maintained at a high level.

Schlagwörter

Stichwörter der Autor:innen

breakdown strengthfluorosilicone rubberhydrophobicitymechanical propertiessilicone rubber

Autor:innen und Institutionen

  • State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University, Beijing 102206, China.
  • Jiangmen Power Dispatching Center of Jiangmen Power Grid, Jiangmen 529000, China.

ORCID-Profile: Shaojian He

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Wang, Z., Lin, Y., Li, Z., Yang, Y., Lin, J., & He, S. (2023). Effect of Fluorosilicone Rubber on Mechanical Properties, Dielectric Breakdown Strength and Hydrophobicity of Methyl Vinyl Silicone Rubber. Polymers, 15(16), 3448. https://doi.org/10.3390/polym15163448

Vancouver

Wang Z, Lin Y, Li Z, Yang Y, Lin J, He S. Effect of Fluorosilicone Rubber on Mechanical Properties, Dielectric Breakdown Strength and Hydrophobicity of Methyl Vinyl Silicone Rubber. Polymers. 2023;15(16):3448. doi:10.3390/polym15163448

BibTeX
@article{Wang2023,
  author = {Wang, Zhaoyang and Lin, Yankai and Li, Zhanxu and Yang, Yumeng and Lin, Jun and He, Shaojian},
  title = {Effect of Fluorosilicone Rubber on Mechanical Properties, Dielectric Breakdown Strength and Hydrophobicity of Methyl Vinyl Silicone Rubber},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {16},
  pages = {3448},
  doi = {10.3390/polym15163448}
}
Kostenlos starten →