EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hybrid Composite Materials Made of Recycled PET and Standard Polymer Blends Used in Civil Engineering

Daniel Papán iD, Lenka Lapašová, Zuzana Papánová iD

Polymers · 14.08.2023 · 15 (16) · 3407

DOI: 10.3390/polym15163407 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 14.08.2023. Verfasst von Daniel Papán und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Structural Mechanics and Applied Mathematics, Faculty of Civil Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Sl…. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Science, Research and Sport of the Slovak Republic.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents an investigation of the tensile properties of two composites made from recycled polyethylene tetraphthalate, cement–concrete mix and standard polymer-based adhesive mixes, used in the construction industry. To describe tensile behavior, experimental measurements of each component of the resulting composite materials were processed in detail. It presents the possibilities of modifying materials suitable for building structures and at the same time provides an opportunity to get rid of polyethylene tetraphthalate (PET), which has already been recycled several times. Because the resulting composite contains a majority of the composite composition on a fragile basis, its use in practice depends on its simple thrust properties. In this paper, a study of the most important mechanical properties of a previously unused composite is presented. These properties were obtained experimentally using an innovative tensile test method.

Schlagwörter

Stichwörter der Autor:innen

cement–concreteforce standhybrid compositemechanical propertiesmodern materialpolyethylene tetraphthalatepolymer compositestress–strain diagram

Autor:innen und Institutionen

  • Department of Structural Mechanics and Applied Mathematics, Faculty of Civil Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovakia.
  • Faculty of Civil Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovakia.

ORCID-Profile: Daniel Papán, Zuzana Papánová

Förderung

  • Ministry of Education, Science, Research and Sport of the Slovak Republic

Zitieren

APA

Papán, D., Lapašová, L., & Papánová, Z. (2023). Hybrid Composite Materials Made of Recycled PET and Standard Polymer Blends Used in Civil Engineering. Polymers, 15(16), 3407. https://doi.org/10.3390/polym15163407

Vancouver

Papán D, Lapašová L, Papánová Z. Hybrid Composite Materials Made of Recycled PET and Standard Polymer Blends Used in Civil Engineering. Polymers. 2023;15(16):3407. doi:10.3390/polym15163407

BibTeX
@article{Papn2023,
  author = {Papán, Daniel and Lapašová, Lenka and Papánová, Zuzana},
  title = {Hybrid Composite Materials Made of Recycled PET and Standard Polymer Blends Used in Civil Engineering},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {16},
  pages = {3407},
  doi = {10.3390/polym15163407}
}
Kostenlos starten →