EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on Mechanical Properties of Carbon Nanotube Reinforced Composites

Zhouyi Li, Haoran Liu, Yuan Li

Polymers · 10.08.2023 · 15 (16) · 3362

DOI: 10.3390/polym15163362 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 10.08.2023. Verfasst von Zhouyi Li und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Teacher Doctoral Research funding of Xi'an University of Technology, National Natural Science Foundation of China, Teacher Doctoral Research funding of Xi’an University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, carbon fiber composite laminates were modified by carbon nanotube films. In-plane and out-of-plane compression tests were carried out in a wide strain rate range (10−3–103/s). Results display that the out-of-plane compressive properties are improved by CNT interlaminar toughening because CNT can hinder the propagation of interlayer cracks; however, the dynamic in-plane compression performance is decreased due to the lack of resin in CNT film that leads to delamination inside of CNT film in advance. To optimize the material preparation process, two methods were used to prepare the mode I fracture test: (a) curing the prepreg by autoclave process; and (b) curing of resin preform by vacuum resin-transmitted molding (VARTM). Results showed that CNT prolonged the crack propagation path and improved the interlaminar fracture properties when the preform was infiltrated with resin and cured by VARTM. In addition, it was found that the interlaminar thickness was almost linear with the number of CNT layers.

Schlagwörter

Stichwörter der Autor:innen

carbon nanotubecomposite structureshigh strain rateinterlaminar toughening

Autor:innen und Institutionen

  • School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, China.
  • School of Civil Engineering and Architecture, Xi'an University of Technology, Xi'an 710048, China.

Förderung

  • Teacher Doctoral Research funding of Xi'an University of Technology
  • National Natural Science Foundation of China
  • Teacher Doctoral Research funding of Xi’an University of Technology

Zitieren

APA

Li, Z., Liu, H., & Li, Y. (2023). Study on Mechanical Properties of Carbon Nanotube Reinforced Composites. Polymers, 15(16), 3362. https://doi.org/10.3390/polym15163362

Vancouver

Li Z, Liu H, Li Y. Study on Mechanical Properties of Carbon Nanotube Reinforced Composites. Polymers. 2023;15(16):3362. doi:10.3390/polym15163362

BibTeX
@article{Li2023,
  author = {Li, Zhouyi and Liu, Haoran and Li, Yuan},
  title = {Study on Mechanical Properties of Carbon Nanotube Reinforced Composites},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {16},
  pages = {3362},
  doi = {10.3390/polym15163362}
}
Kostenlos starten →