EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Characterization of Novel Green Seaweed Films from Ulva rigida

Uruchaya Sonchaeng iD, Phanwipa Wongphan, Wanida Pan-Utai iD, Yupadee Paopun, Wiratchanee Kansandee, Prajongwate Satmalee, Montakan Tamtin, Prapat Kosawatpat, Nathdanai Harnkarnsujarit iD

Polymers · 08.08.2023 · 15 (16) · 3342

DOI: 10.3390/polym15163342 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 08.08.2023. Verfasst von Uruchaya Sonchaeng und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Packaging and Materials Technology, Faculty of Agro-Industry, Kasetsart University, Bangkok 10900, Thailand. Die Arbeit wurde bisher 33-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kasetsart University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ulva rigida green seaweed is an abundant biomass consisting of polysaccharides and protein mixtures and a potential bioresource for bioplastic food packaging. This research prepared and characterized novel biodegradable films from Ulva rigida extracts. The water-soluble fraction of Ulva rigida was extracted and prepared into bioplastic films. 1H nuclear magnetic resonance indicated the presence of rhamnose, glucuronic and sulfate polysaccharides, while major amino acid components determined via high-performance liquid chromatography (HPLC) were aspartic acid, glutamic acid, alanine and glycine. Seaweed extracts were formulated with glycerol and triethyl citrate (20% and 30%) and prepared into films. Ulva rigida films showed non-homogeneous microstructures, as determined via scanning electron microscopy, due to immiscible crystalline component mixtures. X-ray diffraction also indicated modified crystalline morphology due to different plasticizers, while infrared spectra suggested interaction between plasticizers and Ulva rigida polymers via hydrogen bonding. The addition of glycerol decreased the glass transition temperature of the films from −36 °C for control films to −62 °C for films with 30% glycerol, indicating better plasticization. Water vapor and oxygen permeability were retained at up to 20% plasticizer content, and further addition of plasticizers increased the water permeability up to 6.5 g·mm/m2·day·KPa, while oxygen permeability decreased below 20 mL·mm/m2·day·atm when blending plasticizers at 30%. Adding glycerol efficiently improved tensile stress and strain by up to 4- and 3-fold, respectively. Glycerol-plasticized Ulva rigida extract films were produced as novel bio-based materials that supported sustainable food packaging.

Schlagwörter

Stichwörter der Autor:innen

algaebiomaterialbioplasticbiopolymeredible filmfood packaging

Autor:innen und Institutionen

  • Department of Packaging and Materials Technology, Faculty of Agro-Industry, Kasetsart University, Bangkok 10900, Thailand.
  • Department of Applied Microbiology, Institute of Food Research and Product Development, Kasetsart University, Bangkok 10900, Thailand.
  • Scientific Equipment and Research Division, Kasetsart University Research and Development Institute, Kasetsart University, Bangkok 10900, Thailand.
  • Department of Food Chemistry and Physics, Institute of Food Research and Product Development, Kasetsart University, Bangkok 10900, Thailand.
  • Kung Krabaen Bay Royal Development Study Center, Department of Fisheries, Ministry of Agriculture and Cooperatives, Chantha Buri 22120, Thailand.
  • Phetchaburi Coastal Aquaculture Research and Development Center, Coastal Aquaculture Research and Development Division, Department of Fisheries, Ministry of Agriculture and Cooperatives, Phetchaburi 76100, Thailand.

ORCID-Profile: Uruchaya Sonchaeng, Wanida Pan-Utai, Nathdanai Harnkarnsujarit

Förderung

  • Kasetsart University

Zitieren

APA

Sonchaeng, U., Wongphan, P., Pan-Utai, W., Paopun, Y., Kansandee, W., Satmalee, P., Tamtin, M., Kosawatpat, P., & Harnkarnsujarit, N. (2023). Preparation and Characterization of Novel Green Seaweed Films from Ulva rigida. Polymers, 15(16), 3342. https://doi.org/10.3390/polym15163342

Vancouver

Sonchaeng U, Wongphan P, Pan-Utai W, Paopun Y, Kansandee W, Satmalee P, et al. Preparation and Characterization of Novel Green Seaweed Films from Ulva rigida. Polymers. 2023;15(16):3342. doi:10.3390/polym15163342

BibTeX
@article{Sonchaeng2023,
  author = {Sonchaeng, Uruchaya and Wongphan, Phanwipa and Pan-Utai, Wanida and Paopun, Yupadee and Kansandee, Wiratchanee and Satmalee, Prajongwate and Tamtin, Montakan and Kosawatpat, Prapat and Harnkarnsujarit, Nathdanai},
  title = {Preparation and Characterization of Novel Green Seaweed Films from Ulva rigida},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {16},
  pages = {3342},
  doi = {10.3390/polym15163342}
}
Kostenlos starten →