EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Enhancing Mechanical Properties and Flux of Nanofibre Membranes for Water Filtration

Siddratul Sarah Binti Mohd Hami, Nor Dalila Nor Affandi iD, Liliana Indrie iD, Simona Tripa iD, Ahmad Mukifza Harun, Mohd Rozi Ahmad

Polymers · 02.08.2023 · 15 (15) · 3281

DOI: 10.3390/polym15153281 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 02.08.2023. Verfasst von Siddratul Sarah Binti Mohd Hami und 5 weiteren Autor:innen. Beteiligte Einrichtung: Textile Research Group, Faculty of Applied Sciences, Universiti Teknologi MARA, Shah Alam 40450, Selangor, Malaysia. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Higher Education, Erasmus +, University of Oradea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nanofibres have gained attention for their highly porous structure, narrow pore size, and high specific surface area. One of the most efficient techniques for producing nanofibres is electrospinning. These fibres are used in various fields, including water filtration. Although they possess the ability to filter various components, the fibres generally have low mechanical strength, which can mitigate their performance over time. To address this, studies have focused on enhancing nanofibre membrane strength for water filtration. Previous analyses show that the mechanical properties of nanofibre mats can be improved through solvent vapour treatment, thermal treatment, and chemical crosslinking. These treatments promote interfibre bonding, leading to the improvement of mechanical strength. However, excessive treatment alters nanofibre behaviour. Excessive heat exposure reduces interfibre bonding, while too much solvent vapour decreases pore size and mechanical strength. Thus, a comprehensive understanding of these post-treatments is crucial. This review examines post-treatments aiming to increase the mechanical strength of nanofibre mats, discussing their advantages and disadvantages. Understanding these treatments is essential for optimising nanofibre membrane performance in water filtration and other applications.

Schlagwörter

Stichwörter der Autor:innen

electrospinningmechanical propertiesnanofibrespost-treatmentswater filtration

Autor:innen und Institutionen

  • Textile Research Group, Faculty of Applied Sciences, Universiti Teknologi MARA, Shah Alam 40450, Selangor, Malaysia.
  • Department of Textiles, Leather and Industrial Management, Faculty of Energy Engineering and Industrial Management, University of Oradea, Universitatii Str. No. 1, 410087 Oradea, Romania.
  • Nano Lab, Faculty Engineering, University Malaysia Sabah, Kota Kinabalu 88400, Sabah, Malaysia.

ORCID-Profile: Nor Dalila Nor Affandi, Liliana Indrie, Simona Tripa

Förderung

  • Ministry of Higher Education
  • Erasmus +
  • University of Oradea

Zitieren

APA

Hami, S. S. B. M., Affandi, N. D. N., Indrie, L., Tripa, S., Harun, A. M., & Ahmad, M. R. (2023). Enhancing Mechanical Properties and Flux of Nanofibre Membranes for Water Filtration. Polymers, 15(15), 3281. https://doi.org/10.3390/polym15153281

Vancouver

Hami SSBM, Affandi NDN, Indrie L, Tripa S, Harun AM, Ahmad MR. Enhancing Mechanical Properties and Flux of Nanofibre Membranes for Water Filtration. Polymers. 2023;15(15):3281. doi:10.3390/polym15153281

BibTeX
@article{Hami2023,
  author = {Hami, Siddratul Sarah Binti Mohd and Affandi, Nor Dalila Nor and Indrie, Liliana and Tripa, Simona and Harun, Ahmad Mukifza and Ahmad, Mohd Rozi},
  title = {Enhancing Mechanical Properties and Flux of Nanofibre Membranes for Water Filtration},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {15},
  pages = {3281},
  doi = {10.3390/polym15153281}
}
Kostenlos starten →