EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Advanced Plastic Waste Recycling—The Effect of Clay on the Morphological and Thermal Behavior of Recycled PET/PLA Sustainable Blends

Maria-Paraskevi Belioka, Georgia Markozanne, Kiriaki Chrissopoulou iD, Dimitrios S Achilias iD

Polymers · 24.07.2023 · 15 (14) · 3145

DOI: 10.3390/polym15143145 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 24.07.2023. Verfasst von Maria-Paraskevi Belioka und 3 weiteren Autor:innen. Beteiligte Einrichtung: Lab of Polymer and Color Chemistry and Technology, Department of Chemistry, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bio-based polymers such as poly(lactic acid), PLA, are facing increased use in everyday plastic packaging, imposing challenges in the recycling process of its counterpart polyester poly(ethylene terephthalate), PET. This work presents the exploration of the properties of PET/PLA blends with raw materials obtained from recycled plastics. Several blends were prepared, containing 50 to 90% PET. Moreover, multiscale nanocomposite blends were formed via melt mixing using different amounts and types of nanoclay in order to study their effect on the morphology, surface properties, and thermal stability of the blends. The materials were characterized by X-ray diffraction analysis (XRD), thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM), atomic force microscopy (AFM), and differential scanning calorimetry (DSC). The nanoclay was found to exhibit a uniform dispersion in the polymer matrix, presenting mainly intercalated structures with some exfoliated at low loading and some agglomerates at high loading (i.e., 10%). The addition of nanoclay to PET/PLA matrices increased the roughness of the blends and improved their thermal stability. Thermal degradation of the blends occurs in two steps following those of the individual polymers. Contamination of rPET with rPLA results in materials having poor thermal stability relative to rPET, presenting the onset of thermal degradation at nearly 100 °C lower. Therefore, important information was obtained concerning the recyclability of mixed PET and PLA waste. The perspective is to study the properties and find potential applications of sustainable blends of recycled PET and PLA by also examining the effect of different clays in different loadings. Therefore, useful products could be produced from blends of waste polyester.

Schlagwörter

Stichwörter der Autor:innen

PET/PLA blendsbiobased polymerscircular economymorphologynanoclaynanocomposite polymersplastic wasterecyclingsustainable plasticsthermal degradation

Autor:innen und Institutionen

  • Lab of Polymer and Color Chemistry and Technology, Department of Chemistry, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece.
  • Institute of Electronic Structure and Laser, Foundation for Research and Technology-Hellas, 70013 Heraklion, Crete, Greece.

ORCID-Profile: Kiriaki Chrissopoulou, Dimitrios S Achilias

Zitieren

APA

Belioka, M. P., Markozanne, G., Chrissopoulou, K., & Achilias, D. S. (2023). Advanced Plastic Waste Recycling—The Effect of Clay on the Morphological and Thermal Behavior of Recycled PET/PLA Sustainable Blends. Polymers, 15(14), 3145. https://doi.org/10.3390/polym15143145

Vancouver

Belioka MP, Markozanne G, Chrissopoulou K, Achilias DS. Advanced Plastic Waste Recycling—The Effect of Clay on the Morphological and Thermal Behavior of Recycled PET/PLA Sustainable Blends. Polymers. 2023;15(14):3145. doi:10.3390/polym15143145

BibTeX
@article{Belioka2023,
  author = {Belioka, Maria-Paraskevi and Markozanne, Georgia and Chrissopoulou, Kiriaki and Achilias, Dimitrios S},
  title = {Advanced Plastic Waste Recycling—The Effect of Clay on the Morphological and Thermal Behavior of Recycled PET/PLA Sustainable Blends},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {14},
  pages = {3145},
  doi = {10.3390/polym15143145}
}
Kostenlos starten →