EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental and Environmental Analysis of High-Strength Geopolymer Based on Waste Bricks and Blast Furnace Slag

Jan Fořt iD, Martin Mildner, Martin Keppert iD, Vojtěch Pommer, Robert Černý iD

Polymers · 19.07.2023 · 15 (14) · 3092

DOI: 10.3390/polym15143092 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 19.07.2023. Verfasst von Jan Fořt und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Engineering and Chemistry, Faculty of Civil Engineering, Czech Technical University in Prague, Thakurova 7, 166 29 Prague, Cz…. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technology Agency of the Czech Republic, Czech Technical University in Prague.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The rationalization of material flows, together with the utilization of waste raw materials for the production of alternative binders, became a very attractive topic during the last decades. However, the majority of designed materials can be used as a replacement for low-performance products. In this work, the waste materials (brick powder and blast furnace slag) are valorized through geopolymerization to design high-performance material as an alternative to high-performance concrete. Designed mixtures activated by sodium silicate and waste-originated alkali solution are characterized by the meaning of the chemical and mineralogical composition, evolution of hydration heat, and mechanical strength test. To contribute to the understanding of the environmental consequences and potential benefits, the carbon footprint and embodied energy analysis are provided. Obtained results highlight the potential of end-of-life bricks for the design of high-performance composites if mixed together with more reactive precursors. Here, even values over 60 MPa in compressive strength can be achieved with the dominant share of low-amorphous brick powder. The higher crystalline portion of brick powder may lead to the reduction of drying shrinkage and preservation of flexural strength to a greater extent compared to used slag. Performed environmental analysis confirmed the CO2 emission savings; however, the embodied energy analysis revealed a huge impact of using alkaline activators.

Schlagwörter

Stichwörter der Autor:innen

alkali activationblast furnace slagbrick powderenvironmental footprintgeopolymermechanical strength

Autor:innen und Institutionen

  • Department of Materials Engineering and Chemistry, Faculty of Civil Engineering, Czech Technical University in Prague, Thakurova 7, 166 29 Prague, Czech Republic.

ORCID-Profile: Jan Fořt, Martin Keppert, Robert Černý

Förderung

  • Technology Agency of the Czech Republic
  • Czech Technical University in Prague

Zitieren

APA

Fořt, J., Mildner, M., Keppert, M., Pommer, V., & Černý, R. (2023). Experimental and Environmental Analysis of High-Strength Geopolymer Based on Waste Bricks and Blast Furnace Slag. Polymers, 15(14), 3092. https://doi.org/10.3390/polym15143092

Vancouver

Fořt J, Mildner M, Keppert M, Pommer V, Černý R. Experimental and Environmental Analysis of High-Strength Geopolymer Based on Waste Bricks and Blast Furnace Slag. Polymers. 2023;15(14):3092. doi:10.3390/polym15143092

BibTeX
@article{Fot2023,
  author = {Fořt, Jan and Mildner, Martin and Keppert, Martin and Pommer, Vojtěch and Černý, Robert},
  title = {Experimental and Environmental Analysis of High-Strength Geopolymer Based on Waste Bricks and Blast Furnace Slag},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {14},
  pages = {3092},
  doi = {10.3390/polym15143092}
}
Kostenlos starten →