EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Sustainable Gel Polymer Electrolyte for Solid-State Electrochemical Devices

Serena Tombolesi, Niccolò Zanieri, Luca Bargnesi, Martina Mernini, Giampaolo Lacarbonara, Catia Arbizzani iD

Polymers · 19.07.2023 · 15 (14) · 3087

DOI: 10.3390/polym15143087 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 19.07.2023. Verfasst von Serena Tombolesi und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry Giacomo Ciamician, University of Bologna, 40126 Bologna, Italy. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union, National Recovery and Resilience Plan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nowadays, solid polymer electrolytes have attracted increasing attention for their wide electrochemical stability window, low cost, excellent processability, flexibility and low interfacial impedance. Specifically, gel polymer electrolytes (GPEs) are attractive substitutes for liquid ones due to their high ionic conductivity (10−3–10−2 S cm−1) at room temperature and solid-like dimensional stability with excellent flexibility. These characteristics make GPEs promising materials for electrochemical device applications, i.e., high-energy-density rechargeable batteries, supercapacitors, electrochromic displays, sensors, and actuators. The aim of this study is to demonstrate the viability of a sustainable GPE, prepared without using organic solvents or ionic liquids and with a simplified preparation route, that can substitute aqueous electrolytes in electrochemical devices operating at low voltages (up to 2 V). A polyvinyl alcohol (PVA)-based GPE has been cast from an aqueous solution and characterized with physicochemical and electrochemical methods. Its electrochemical stability has been assessed with capacitive electrodes in a supercapacitor configuration, and its good ionic conductivity and stability in the atmosphere in terms of water loss have been demonstrated. The feasibility of GPE in an electrochemical sensor configuration with a mediator embedded in an insulating polymer matrix (ferrocene/polyvinylidene difluoride system) has also been reported.

Schlagwörter

Stichwörter der Autor:innen

GPEactuatorscapacitive electrodegel polymer electrolytepoly vinyl alcoholsensors

Autor:innen und Institutionen

  • Department of Chemistry Giacomo Ciamician, University of Bologna, 40126 Bologna, Italy.

ORCID-Profile: Catia Arbizzani

Förderung

  • European Union
  • National Recovery and Resilience Plan

Zitieren

APA

Tombolesi, S., Zanieri, N., Bargnesi, L., Mernini, M., Lacarbonara, G., & Arbizzani, C. (2023). A Sustainable Gel Polymer Electrolyte for Solid-State Electrochemical Devices. Polymers, 15(14), 3087. https://doi.org/10.3390/polym15143087

Vancouver

Tombolesi S, Zanieri N, Bargnesi L, Mernini M, Lacarbonara G, Arbizzani C. A Sustainable Gel Polymer Electrolyte for Solid-State Electrochemical Devices. Polymers. 2023;15(14):3087. doi:10.3390/polym15143087

BibTeX
@article{Tombolesi2023,
  author = {Tombolesi, Serena and Zanieri, Niccolò and Bargnesi, Luca and Mernini, Martina and Lacarbonara, Giampaolo and Arbizzani, Catia},
  title = {A Sustainable Gel Polymer Electrolyte for Solid-State Electrochemical Devices},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {14},
  pages = {3087},
  doi = {10.3390/polym15143087}
}
Kostenlos starten →