A Leakage Prediction Model for Sealing Performance Assessment of EPDM O-Rings under Irradiation Conditions
Polymers · 17.07.2023 · 15 (14) · 3073
DOI: 10.3390/polym15143073 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 17.07.2023. Verfasst von Xiaoming Huang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan 430074, China. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National key Research and Development program of China.
Abstract (Originalsprache)
In this work, a model for predicting the leakage rate was developed to investigate the effect of irradiation on the sealing performance of ethylene propylene diene monomer (EPDM) O-rings. The model is based on a mesoscopic interfacial gap flow simulation and accurately predicts the sealing performance of irradiated and non-irradiated materials by utilizing the gap height as an indicator in a mechanical simulation of the O-ring under operating conditions. A comparison with vacuum test results indicates that the model is a good predictor of leak initiation. The positive pressure leakage of the O-rings was investigated numerically. The results show the following. The sealing performance of the non-irradiated O-ring is much better than that of the irradiated one. The sealing performance is the worst at 0. 713 MGy and the best at 1.43 MGy, and the seal is maintained at an absorbed dose of 3.55 MGy. A theoretical analysis of the non-monotonic variation using the proposed model shows that the leakage behavior of the O-rings depends not only on the material properties but also on the roughness and prestressing properties. Finally, a method was proposed to classify the sealing performance, using the maximum allowable leakage rate as an indicator.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan 430074, China.
- China Nuclear Power Engineering Co., Ltd., No.117, Xisanhuanbeilu, Haidian District, Beijing 100840, China.
Förderung
- National key Research and Development program of China
Zitieren
APA
Huang, X., Gu, J., Li, M., Yu, X., Liu, Y., & Xu, G. (2023). A Leakage Prediction Model for Sealing Performance Assessment of EPDM O-Rings under Irradiation Conditions. Polymers, 15(14), 3073. https://doi.org/10.3390/polym15143073
Vancouver
Huang X, Gu J, Li M, Yu X, Liu Y, Xu G. A Leakage Prediction Model for Sealing Performance Assessment of EPDM O-Rings under Irradiation Conditions. Polymers. 2023;15(14):3073. doi:10.3390/polym15143073
BibTeX
@article{Huang2023,
author = {Huang, Xiaoming and Gu, Jimin and Li, Ming and Yu, Xinli and Liu, Yu and Xu, Guoliang},
title = {A Leakage Prediction Model for Sealing Performance Assessment of EPDM O-Rings under Irradiation Conditions},
journal = {Polymers},
year = {2023},
volume = {15},
number = {14},
pages = {3073},
doi = {10.3390/polym15143073}
}
EUVIMED