EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Using Pegylated Graphene Oxide to Achieve High Performance Solid Polymer Electrolyte Based on Poly(ethylene oxide)/Polyvinyl Alcohol Blend (PEO/PVA)

Behnam Eslami, Ismaeil Ghasemi, Masoud Esfandeh

Polymers · 17.07.2023 · 15 (14) · 3063

DOI: 10.3390/polym15143063 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 17.07.2023. Verfasst von Behnam Eslami und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Processing, Department of Plastic Processing and Engineering, Iran Polymer and Petrochemical Institute, Tehran P.O. Box 14965/115, Iran. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solid polymer electrolytes (SPEs) have emerged as a promising avenue for developing flexible lithium-ion batteries. However, the low ionic conductivity of polymers remains a primary challenge that has been the subject of intensive research efforts in recent years. In this work, polyethylene oxide (PEO), polyvinyl alcohol, lithium perchlorate (LiClO4), and graphene functionalized with polyethylene glycol (FGO) have been used to prepare SPE/FGO electrolytes by casting solution technique. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) confirmed the reduction of SPE crystals and the increase of amorphous phases. The results demonstrated that the presence of functionalized graphene had an effective role in reducing crystallinity. Furthermore, the thermal and mechanical stability of the samples were corroborated through thermogravimetric analysis (TGA) and tensile tests, respectively. Notably, the samples exhibited adequate ionic conductivity at room temperature, with the highest ionic conductivity of 5.2 × 10−5 S·cm−1 observed for 2%wt of FGO in SPE (SPE/FGO(2)).

Schlagwörter

Stichwörter der Autor:innen

ionic conductivitynanocompositesolid polymer electrolyte

Autor:innen und Institutionen

  • Faculty of Processing, Department of Plastic Processing and Engineering, Iran Polymer and Petrochemical Institute, Tehran P.O. Box 14965/115, Iran.

Zitieren

APA

Eslami, B., Ghasemi, I., & Esfandeh, M. (2023). Using Pegylated Graphene Oxide to Achieve High Performance Solid Polymer Electrolyte Based on Poly(ethylene oxide)/Polyvinyl Alcohol Blend (PEO/PVA). Polymers, 15(14), 3063. https://doi.org/10.3390/polym15143063

Vancouver

Eslami B, Ghasemi I, Esfandeh M. Using Pegylated Graphene Oxide to Achieve High Performance Solid Polymer Electrolyte Based on Poly(ethylene oxide)/Polyvinyl Alcohol Blend (PEO/PVA). Polymers. 2023;15(14):3063. doi:10.3390/polym15143063

BibTeX
@article{Eslami2023,
  author = {Eslami, Behnam and Ghasemi, Ismaeil and Esfandeh, Masoud},
  title = {Using Pegylated Graphene Oxide to Achieve High Performance Solid Polymer Electrolyte Based on Poly(ethylene oxide)/Polyvinyl Alcohol Blend (PEO/PVA)},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {14},
  pages = {3063},
  doi = {10.3390/polym15143063}
}
Kostenlos starten →