EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Novel PEG6000–Silica-MWCNTs Shape-Stabilized Composite Phase-Change Materials (ssCPCMs) for Thermal-Energy Storage

Cristina Lavinia Nistor iD, Ioana Catalina Gifu iD, Elena Maria Anghel iD, Raluca Ianchis iD, Cristiana-Diana Cirstea, Cristian Andi Nicolae, Augusta Raluca Gabor iD, Irina Atkinson iD, Cristian Petcu iD

Polymers · 12.07.2023 · 15 (14) · 3022

DOI: 10.3390/polym15143022 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 12.07.2023. Verfasst von Cristina Lavinia Nistor und 8 weiteren Autor:innen. Beteiligte Einrichtung: Polymers Department, National Institute for Research and Development in Chemistry and Petrochemistry-ICECHIM, 202 Spl. Independentei, 060021 Buchares…. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Romanian Ministry of Research, Innovation and Digitalization (MCID), Romanian Ministry of Research, Innovation and Digitalization (MCID) through the INCDCP ICECHIM Bucharest 2019–2022 Core Program PN. 19.23–ChemErgent, Romanian Ministry of Research, Innovation and Digitalization (MCID) through the INCDCP ICECHIM Bucharest 2023–2026 Core Program PN. 23.06–ChemNewDeal.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper describes the preparation of new PEG6000–silica-MWCNTs composites as shape-stabilized phase change materials (ssPCMs) for application in latent heat storage. An innovative method was employed to obtain the new organic–inorganic hybrid materials, in which both a part of the PEG chains, used as the phase change material, and a part of the hydroxyl functionalized multiwall carbon nanotubes (MWCNTs-OH), used as thermo-conductive fillers, were covalently connected by newly formed urethane bonds to the in-situ-generated silica matrix. The study’s main aim was to investigate the optimal amount of PEG6000 that can be added to the fixed sol–gel reaction mixture so that no leakage of PEG occurs after repeated heating–cooling cycles. The findings show that the optimum PEG6000/NCOTEOS molar ratio was 2/1 (~91.5% PEG6000), because both the connected and free PEG chains interacted strongly with the in-situ-generated silica matrix to form a shape-stabilized material while preserving high phase-transition enthalpies (~153 J/G). Morphological and structural findings obtained by SEM, X-ray and Raman techniques indicated a distribution of the silica component in the amorphous phase (~27% for the optimum composition) located among the crystalline lamellae built by the folded chains of the PEG component. This composite maintained good chemical stability after a 450-cycle thermal test and had a good storage efficiency (~84%).

Schlagwörter

Stichwörter der Autor:innen

PEG-silica PCMsenergy storagelatent heatshape-stabilized phase change materialssolid–liquid phase changethermal properties

Autor:innen und Institutionen

  • Polymers Department, National Institute for Research and Development in Chemistry and Petrochemistry-ICECHIM, 202 Spl. Independentei, 060021 Bucharest, Romania.
  • Institute of Physical Chemistry "Ilie Murgulescu" of the Romanian Academy, 202 Splaiul Independentei, 060021 Bucharest, Romania.
  • National Institute for Research and Development in Electrical Engineering ICPE-CA, INCDIE ICPE-CA, 313 Splaiul Unirii Street, 030138 Bucharest, Romania.

ORCID-Profile: Cristina Lavinia Nistor, Ioana Catalina Gifu, Elena Maria Anghel, Raluca Ianchis, Augusta Raluca Gabor, Irina Atkinson, Cristian Petcu

Förderung

  • Romanian Ministry of Research, Innovation and Digitalization (MCID)
  • Romanian Ministry of Research, Innovation and Digitalization (MCID) through the INCDCP ICECHIM Bucharest 2019–2022 Core Program PN. 19.23–ChemErgent
  • Romanian Ministry of Research, Innovation and Digitalization (MCID) through the INCDCP ICECHIM Bucharest 2023–2026 Core Program PN. 23.06–ChemNewDeal

Zitieren

APA

Nistor, C. L., Gifu, I. C., Anghel, E. M., Ianchis, R., Cirstea, C. D., Nicolae, C. A., Gabor, A. R., Atkinson, I., & Petcu, C. (2023). Novel PEG6000–Silica-MWCNTs Shape-Stabilized Composite Phase-Change Materials (ssCPCMs) for Thermal-Energy Storage. Polymers, 15(14), 3022. https://doi.org/10.3390/polym15143022

Vancouver

Nistor CL, Gifu IC, Anghel EM, Ianchis R, Cirstea CD, Nicolae CA, et al. Novel PEG6000–Silica-MWCNTs Shape-Stabilized Composite Phase-Change Materials (ssCPCMs) for Thermal-Energy Storage. Polymers. 2023;15(14):3022. doi:10.3390/polym15143022

BibTeX
@article{Nistor2023,
  author = {Nistor, Cristina Lavinia and Gifu, Ioana Catalina and Anghel, Elena Maria and Ianchis, Raluca and Cirstea, Cristiana-Diana and Nicolae, Cristian Andi and Gabor, Augusta Raluca and Atkinson, Irina and Petcu, Cristian},
  title = {Novel PEG6000–Silica-MWCNTs Shape-Stabilized Composite Phase-Change Materials (ssCPCMs) for Thermal-Energy Storage},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {14},
  pages = {3022},
  doi = {10.3390/polym15143022}
}
Kostenlos starten →