EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polymeric Materials Selection for Flexible Pulsating Heat Pipe Manufacturing Using a Comparative Hybrid MCDM Approach

Muhammed Ordu, Oguzhan Der iD

Polymers · 03.07.2023 · 15 (13) · 2933

DOI: 10.3390/polym15132933 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 03.07.2023. Verfasst von Muhammed Ordu und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial Engineering, Faculty of Engineering, Osmaniye Korkut Ata University, 80010 Osmaniye, Turkey. Die Arbeit wurde bisher 76-mal zitiert (Crossref) und nennt 77 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The right choice of polymeric materials plays a vital role in the successful design and manufacture of flexible fluidic systems, as well as heat transfer devices such as pulsating heat pipes. The decision to choose an acceptable polymeric material entails a variety of evaluation criteria because there are numerous competing materials available today, each with its own properties, applications, benefits, and drawbacks. In this study, a comparative hybrid multi-criteria decision-making (MCDM) model is proposed for evaluating suitable polymeric materials for the fabrication of flexible pulsating heat pipes. The decision model consists of fourteen evaluation criteria and twelve alternative materials. For this purpose, three different hybrid MCDM methods were applied to solve the material selection problems (i.e., AHP-GRA, AHP-CoCoSo, and AHP-VIKOR). According to the results obtained, PTFE, PE, and PP showed promising properties. In addition, Spearman’s rank correlation analysis was performed, and the hybrid methods used produced consistent rankings with each other. By applying MCDM methods, it was concluded that PTFE is the most suitable material to be preferred for manufacturing flexible pulsating heat pipes. In addition to this result, PE and PP are among the best alternatives that can be recommended after PTFE. The study supports the use of MCDM techniques to rank material choices and enhance the selection procedure. The research will greatly assist industrial managers and academics involved in the selection process of polymeric materials.

Schlagwörter

Stichwörter der Autor:innen

flexible pulsating heat pipematerial selectionmulti-criteria decision-makingpolymer

Autor:innen und Institutionen

  • Department of Industrial Engineering, Faculty of Engineering, Osmaniye Korkut Ata University, 80010 Osmaniye, Turkey.
  • Department of Marine Vehicles Management Engineering, Faculty of Maritime, Bandirma Onyedi Eylul University, 10200 Balikesir, Turkey.

ORCID-Profile: Oguzhan Der

Zitieren

APA

Ordu, M., & Der, O. (2023). Polymeric Materials Selection for Flexible Pulsating Heat Pipe Manufacturing Using a Comparative Hybrid MCDM Approach. Polymers, 15(13), 2933. https://doi.org/10.3390/polym15132933

Vancouver

Ordu M, Der O. Polymeric Materials Selection for Flexible Pulsating Heat Pipe Manufacturing Using a Comparative Hybrid MCDM Approach. Polymers. 2023;15(13):2933. doi:10.3390/polym15132933

BibTeX
@article{Ordu2023,
  author = {Ordu, Muhammed and Der, Oguzhan},
  title = {Polymeric Materials Selection for Flexible Pulsating Heat Pipe Manufacturing Using a Comparative Hybrid MCDM Approach},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {13},
  pages = {2933},
  doi = {10.3390/polym15132933}
}
Kostenlos starten →