Designing Sustainable Polymer Blends: Tailoring Mechanical Properties and Degradation Behaviour in PHB/PLA/PCL Blends in a Seawater Environment
Polymers · 29.06.2023 · 15 (13) · 2874
DOI: 10.3390/polym15132874 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 29.06.2023. Verfasst von Leonardo G Engler und 6 weiteren Autor:innen. Beteiligte Einrichtung: PRISM Research Institute, Technological University of the Shannon: Midlands Midwest, Athlone Campus, University Road, N37 HD68 Athlone, Ireland. Die Arbeit wurde bisher 55-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Enterprise Ireland, TTSI technology fund, AIT President's Seed Fund.
Abstract (Originalsprache)
Biodegradable polyesters are a popular choice for both packaging and medical device manufacture owing to their ability to break down into harmless components once they have completed their function. However, commonly used polyesters such as poly(hydroxybutyrate) (PHB), poly(lactic acid) (PLA), and polycaprolactone (PCL), while readily available and have a relatively low price compared to other biodegradable polyesters, do not meet the degradation profiles required for many applications. As such, this study aimed to determine if the mechanical and degradation properties of biodegradable polymers could be tailored by blending different polymers. The seawater degradation mechanisms were evaluated, revealing surface erosion and bulk degradation in the blends. The extent of degradation was found to be dependent on the specific chemical composition of the polymer and the blend ratio, with degradation occurring via hydrolytic, enzymatic, oxidative, or physical pathways. PLA presents the highest tensile strength (67 MPa); the addition of PHB and PCL increased the flexibility of the samples; however, the tensile strength reduced to 25.5 and 18 MPa for the blends 30/50/20 and 50/25/25, respectively. Additionally, PCL presented weight loss of up to 10 wt.% and PHB of up to 6 wt.%; the seawater degradation in the blends occurs by bulk and surface erosion. The blending process facilitated the flexibility of the blends, enabling their use in diverse industrial applications such as medical devices and packaging. The proposed methodology produced biodegradable blends with tailored properties within a seawater environment. Additionally, further tests that fully track the biodegradation process should be put in place; incorporating compatibilizers might promote the miscibility of different polymers, improving their mechanical properties and biodegradability.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- PRISM Research Institute, Technological University of the Shannon: Midlands Midwest, Athlone Campus, University Road, N37 HD68 Athlone, Ireland.
- Postgraduate Program in Materials Science and Engineering, University of Caxias do Sul, Francisco Getúlio Vargas Street, 1130, Caxias do Sul 95070-560, Brazil.
- Applied Polymer Technologies Gateway, Technological University of the Shannon: Midlands Midwest, Athlone Campus, University Road, N37 HD68 Athlone, Ireland.
ORCID-Profile: Leonardo G Engler, Janaina S Crespo, Noel M Gately, Ian Major, Romina Pezzoli, Declan M Devine
Förderung
- Enterprise Ireland
- TTSI technology fund
- AIT President's Seed Fund
- Horizon-CL6-Circbio-01-GA
- Technology Gateway programme
- AIT President’s Seed Fund
- European Research Agency
Zitieren
APA
G Engler, L., Farias, N. C., S Crespo, J., Gately, N. M., Major, I., Pezzoli, R., & Devine, D. M. (2023). Designing Sustainable Polymer Blends: Tailoring Mechanical Properties and Degradation Behaviour in PHB/PLA/PCL Blends in a Seawater Environment. Polymers, 15(13), 2874. https://doi.org/10.3390/polym15132874
Vancouver
G Engler L, Farias NC, S Crespo J, Gately NM, Major I, Pezzoli R, et al. Designing Sustainable Polymer Blends: Tailoring Mechanical Properties and Degradation Behaviour in PHB/PLA/PCL Blends in a Seawater Environment. Polymers. 2023;15(13):2874. doi:10.3390/polym15132874
BibTeX
@article{GEngler2023,
author = {G Engler, Leonardo and Farias, Naiara C and S Crespo, Janaina and Gately, Noel M and Major, Ian and Pezzoli, Romina and Devine, Declan M},
title = {Designing Sustainable Polymer Blends: Tailoring Mechanical Properties and Degradation Behaviour in PHB/PLA/PCL Blends in a Seawater Environment},
journal = {Polymers},
year = {2023},
volume = {15},
number = {13},
pages = {2874},
doi = {10.3390/polym15132874}
}
EUVIMED