Preparation and Characterization of Bio-Based PLA/PEG/g-C3N4 Low-Temperature Composite Phase Change Energy Storage Materials
Polymers · 29.06.2023 · 15 (13) · 2872
DOI: 10.3390/polym15132872 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 29.06.2023. Verfasst von Liu Feng und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Nanjing Institute of Technology, Nanjing 211167, China. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Nanjing Institute of Technology, 2022 Jiangsu Province Higher Education Students Innovation and Entrepreneurship Training Program, Jiangsu Province Postgraduate Research and Practice Innovation Program.
Abstract (Originalsprache)
As energy and environmental issues become more prominent, people must find sustainable, green development paths. Bio-based polymeric phase change energy storage materials provide solutions to cope with these problems. Therefore, in this paper, a fully degradable polyethylene glycol (PEG20000)/polylactic acid (PLA)/g-C3N4 composite phase change energy storage material (CPCM) was obtained by confinement. The CPCM was characterized by FTIR and SEM for compatibility, XRD and nanoindentation for mechanical properties and DSC, LFA, and TG for thermal properties. The results showed that the CPCM was physical co-mingling; when PLA: PEG: g-C3N4 was 6:3:1, the consistency was good. PEG destroys the crystallization of PLA and causes the hardness to decrease. When PLA: PEG: g-C3N4 was 6: 3: 1, it had a maximum hardness of 0.137 GPa. The CPCM had a high latent enthalpy, and endothermic and exothermic enthalpies of 106.1 kJ/kg and 80.05 kJ/kg for the PLA: PEG: g-C3N4 of 3: 6: 1. The CPCM showed an increased thermal conductivity compared to PLA, reaching 0.30 W/(m·K),0.32 W/(m·K) when PLA: PEG: g-C3N4 was 6: 3: 1 and when PLA: PEG: g-C3N4 was 3: 6: 1, respectively. Additionally, the CPCM was stable within 250 °C, indicating a wide appliable temperature range. The CPCM can be applied to solar thermal power generation, transportation, and building construction.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Nanjing Institute of Technology, Nanjing 211167, China.
- School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China.
Förderung
- Nanjing Institute of Technology
- 2022 Jiangsu Province Higher Education Students Innovation and Entrepreneurship Training Program
- Jiangsu Province Postgraduate Research and Practice Innovation Program
Zitieren
APA
Feng, L., Ding, J., Hu, H., Lv, Z., Zhang, Y., Xu, B., Quan, J., Hao, S., Fan, H., & Hang, Z. (2023). Preparation and Characterization of Bio-Based PLA/PEG/g-C3N4 Low-Temperature Composite Phase Change Energy Storage Materials. Polymers, 15(13), 2872. https://doi.org/10.3390/polym15132872
Vancouver
Feng L, Ding J, Hu H, Lv Z, Zhang Y, Xu B, et al. Preparation and Characterization of Bio-Based PLA/PEG/g-C3N4 Low-Temperature Composite Phase Change Energy Storage Materials. Polymers. 2023;15(13):2872. doi:10.3390/polym15132872
BibTeX
@article{Feng2023,
author = {Feng, Liu and Ding, Junjie and Hu, Hengming and Lv, Zichun and Zhang, Yongsheng and Xu, Boqiang and Quan, Jingru and Hao, Shijie and Fan, Haojie and Hang, Zusheng},
title = {Preparation and Characterization of Bio-Based PLA/PEG/g-C3N4 Low-Temperature Composite Phase Change Energy Storage Materials},
journal = {Polymers},
year = {2023},
volume = {15},
number = {13},
pages = {2872},
doi = {10.3390/polym15132872}
}
EUVIMED