Development and Characterization of Polylactic Acid (PLA)-Based Nanocomposites Used for Food Packaging
Polymers · 28.06.2023 · 15 (13) · 2855
DOI: 10.3390/polym15132855 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 28.06.2023. Verfasst von Andrei Moldovan und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department Environmental Engineering and Sustainable Development Entrepreneurship, Technical University of Cluj-Napoca, 400641 Cluj-Napoca, Romania. Die Arbeit wurde bisher 62-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The present study is focused on polylactic acid (PLA) blending with bio nanoadditives, such as Tonsil® (clay) and Aerosil®, to obtain nanocomposites for a new generation of food packaging. The basic composition was enhanced using Sorbitan oleate (E494) and Proviplast as plasticizers, increasing the composite samples’ stability and their mechanical strength. Four mixtures were prepared: S1 with Tonsil®; S2 with Aerosil®; S3 with Aerosil® + Proviplast; and S4 with Sabosorb. They were complexly characterized by FT-IR spectroscopy, differential scanning calorimetry, mechanical tests on different temperatures, and absorption of the saline solution. FTIR shows a proper embedding of the filler component into the polymer matrix and DSC presents a good stability at the living body temperature for all prepared samples. Micro and nanostructural aspects were evidenced by SEM and AFM microscopy, revealing that S3 has the most compact and uniform filler distribution and S4 has the most irregular one. Thus, S3 evidenced the best diametral tensile strength and S4 evidenced the weakest values. All samples present the best bending strength at 18 °C and fair values at 4 °C, with the best values being obtained for the S1 sample and the worst for S4. The lack of mechanical strength of the S4 sample is compensated by its best resistance at liquid penetration, while S1 is more affected by the liquid infiltrations. Finally, results show that PLA composites are suitable for biodegradable and disposable food packages, and the desired properties could be achieved by proper adjustment of the filler proportions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department Environmental Engineering and Sustainable Development Entrepreneurship, Technical University of Cluj-Napoca, 400641 Cluj-Napoca, Romania.
- "Raluca Ripan" Institute of Research in Chemistry, "Babes Bolyai" University, 400294 Cluj-Napoca, Romania.
- Lamar Auto Services S.R.L. Corpadea, 407038 Cluj-Napoca, Romania.
- Faculty of Exact Sciences and Engineering, "1 Decembrie 1918" University of Alba Iulia, 510009 Alba Iulia, Romania.
- Applied Electronics Department, Technical University of Cluj-Napoca, 400027 Cluj-Napoca, Romania.
- Faculty of Chemistry and Chemical Engineering, "Babes-Bolyai" University, 11 Arany Janos Street, 400084 Cluj-Napoca, Romania.
ORCID-Profile: Stanca Cuc, Adrian Catalin Taut, Ioan Petean, Rami Doukeh, Ovidiu Nemes
Zitieren
APA
Moldovan, A., Cuc, S., Prodan, D., Rusu, M., Popa, D., Taut, A. C., Petean, I., Bomboş, D., Doukeh, R., & Nemes, O. (2023). Development and Characterization of Polylactic Acid (PLA)-Based Nanocomposites Used for Food Packaging. Polymers, 15(13), 2855. https://doi.org/10.3390/polym15132855
Vancouver
Moldovan A, Cuc S, Prodan D, Rusu M, Popa D, Taut AC, et al. Development and Characterization of Polylactic Acid (PLA)-Based Nanocomposites Used for Food Packaging. Polymers. 2023;15(13):2855. doi:10.3390/polym15132855
BibTeX
@article{Moldovan2023,
author = {Moldovan, Andrei and Cuc, Stanca and Prodan, Doina and Rusu, Mircea and Popa, Dorin and Taut, Adrian Catalin and Petean, Ioan and Bomboş, Dorin and Doukeh, Rami and Nemes, Ovidiu},
title = {Development and Characterization of Polylactic Acid (PLA)-Based Nanocomposites Used for Food Packaging},
journal = {Polymers},
year = {2023},
volume = {15},
number = {13},
pages = {2855},
doi = {10.3390/polym15132855}
}
EUVIMED