EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Review of Plasma Processing for Polymers and Bio-Materials Using a Commercial Frequency (50/60 Hz)-Generated Discharge

Hong Tak Kim, Cheol Min Jung, Se Hyun Kim, Sung-Youp Lee iD

Polymers · 28.06.2023 · 15 (13) · 2850

DOI: 10.3390/polym15132850 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 28.06.2023. Verfasst von Hong Tak Kim und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, Kyungpook National University, Daegu 41566, Republic of Korea. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 107 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This manuscript introduces the properties and diverse applications of plasma generated using commercial frequencies of 50/60 Hz. Commercial frequency (CF) derived plasma exhibits characteristics similar to DC discharge but with an electrical polarity and a non-continuous discharge. Due to the low-frequency nature, the reactor configurations usually are capacitively coupled plasma type. The advantages of this method include its simple power structure, low-reaction temperature, and low substrate damage. The electrical polarity can prevent charge buildup on the substrates and deposited films, thereby reducing substrate damage. The simple, low-cost, and easy-to-operate power structure makes it suitable for laboratory-scale usage. Additionally, the various applications, including plasma-enhanced vapor deposition, sputtering, dielectric barrier discharge, and surface modification, and their outcomes in the CF-derived plasma processes are summarized. The conclusion drawn is that the CF-derived plasma process is useful for laboratory-scale utilization due to its simplicity, and the results of the plasma process are also outstanding.

Schlagwörter

Stichwörter der Autor:innen

50/60 HzPECVDcommercial frequencydielectric barrier discharge (DBD)plasmapolymersputteringsurface modification

Autor:innen und Institutionen

  • Department of Physics, Kyungpook National University, Daegu 41566, Republic of Korea.
  • Division of Chemical Engineering, Konkuk University, Seoul 05029, Republic of Korea.

ORCID-Profile: Sung-Youp Lee

Förderung

  • National Research Foundation of Korea
  • Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education

Zitieren

APA

Kim, H. T., Jung, C. M., Kim, S. H., & Lee, S. Y. (2023). Review of Plasma Processing for Polymers and Bio-Materials Using a Commercial Frequency (50/60 Hz)-Generated Discharge. Polymers, 15(13), 2850. https://doi.org/10.3390/polym15132850

Vancouver

Kim HT, Jung CM, Kim SH, Lee SY. Review of Plasma Processing for Polymers and Bio-Materials Using a Commercial Frequency (50/60 Hz)-Generated Discharge. Polymers. 2023;15(13):2850. doi:10.3390/polym15132850

BibTeX
@article{Kim2023,
  author = {Kim, Hong Tak and Jung, Cheol Min and Kim, Se Hyun and Lee, Sung-Youp},
  title = {Review of Plasma Processing for Polymers and Bio-Materials Using a Commercial Frequency (50/60 Hz)-Generated Discharge},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {13},
  pages = {2850},
  doi = {10.3390/polym15132850}
}
Kostenlos starten →