EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Walled Carbon-Nanotube-Reinforced PMMA Nanocomposites: An Experimental Study of Their Friction and Wear Properties

Vijay Patel iD, Unnati Joshi, Anand Joshi iD, Blessing Kudzai Matanda iD, Kamlesh Chauhan, Ankit D Oza iD, Diana-Petronela Burduhos-Nergis iD, Dumitru-Doru Burduhos-Nergis iD

Polymers · 22.06.2023 · 15 (13) · 2785

DOI: 10.3390/polym15132785 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 22.06.2023. Verfasst von Vijay Patel und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Parul University, Vadodara 391760, Gujarat, India. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This manuscript presents an experimental investigation of the friction and wear properties of poly (methyl methacrylate) (PMMA) nanocomposites reinforced with functionalized multi-walled carbon nanotubes (MWCNTs). The aim of this study is to evaluate the potential of MWCNTs as a reinforcement material for enhancing the tribological performance of PMMA. Three types of multi-walled carbon nanotubes, i.e., pristine, hydroxyl functionalized, and carboxyl functionalized, were utilized in this study. The nanocomposite samples were prepared by dispersing varying concentrations of MWCNTs (0.1 wt.%, 0.5 wt.%, and 1 wt.%) within the PMMA matrix via a 3D mixing approach, followed by injection molding/compression molding. The resulting nanocomposite films were characterized using scanning electron microscopy (SEM) to observe the dispersion of MWCNTs within the PMMA matrix. The friction and wear tests were conducted using a pin-on-disk tribometer under dry sliding conditions. The effects of functionalization and MWCNT content on the tribological behaviors of the nanocomposites were analyzed. The nanocomposites exhibited lower friction coefficients and reduced wear rates compared to pure PMMA. The lowest friction coefficient and wear rate were achieved at an optimum MWCNT loading of 0.5 wt.%. It was further revealed that the amount of MWCNT reinforcement, average load, and track diameter significantly affect the coefficient of friction (COF) and rate of wear. The COF and wear rate are best at a filler loading of 0.5 wt.%, a 20 Kg load, and 90 mm. The improved tribological performance of the MWCNT-reinforced PMMA nanocomposites can be attributed to the effective transfer of load between the MWCNTs and the PMMA matrix, as well as the reinforcement effect of the MWCNTs. The MWCNTs acted as reinforcing agents, enhancing the mechanical properties and wear resistance of the nanocomposites.

Schlagwörter

Stichwörter der Autor:innen

carbon nanotubesnanocompositescanning electron microscopytribology

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Parul University, Vadodara 391760, Gujarat, India.
  • Department of Mechatronics Engineering, Parul University, Vadodara 391760, Gujarat, India.
  • Department of Mechanical Engineering, Charusat University, Anand 388421, Gujarat, India.
  • Department of Computer Sciences and Engineering, Institute of Advanced Research, Gandhinagar 382426, Gujarat, India.
  • Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi, 700050 Iasi, Romania.

ORCID-Profile: Vijay Patel, Anand Joshi, Blessing Kudzai Matanda, Ankit D Oza, Diana-Petronela Burduhos-Nergis, Dumitru-Doru Burduhos-Nergis

Zitieren

APA

Patel, V., Joshi, U., Joshi, A., Matanda, B. K., Chauhan, K., Oza, A. D., Burduhos-Nergis, D. P., & Burduhos-Nergis, D. D. (2023). Multi-Walled Carbon-Nanotube-Reinforced PMMA Nanocomposites: An Experimental Study of Their Friction and Wear Properties. Polymers, 15(13), 2785. https://doi.org/10.3390/polym15132785

Vancouver

Patel V, Joshi U, Joshi A, Matanda BK, Chauhan K, Oza AD, et al. Multi-Walled Carbon-Nanotube-Reinforced PMMA Nanocomposites: An Experimental Study of Their Friction and Wear Properties. Polymers. 2023;15(13):2785. doi:10.3390/polym15132785

BibTeX
@article{Patel2023,
  author = {Patel, Vijay and Joshi, Unnati and Joshi, Anand and Matanda, Blessing Kudzai and Chauhan, Kamlesh and Oza, Ankit D and Burduhos-Nergis, Diana-Petronela and Burduhos-Nergis, Dumitru-Doru},
  title = {Multi-Walled Carbon-Nanotube-Reinforced PMMA Nanocomposites: An Experimental Study of Their Friction and Wear Properties},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {13},
  pages = {2785},
  doi = {10.3390/polym15132785}
}
Kostenlos starten →