Production of Blended Poly(acrylonitrile): Poly(ethylenedioxythiophene):Poly(styrene sulfonate) Electrospun Fibers for Neural Applications
Polymers · 21.06.2023 · 15 (13) · 2760
DOI: 10.3390/polym15132760 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 21.06.2023. Verfasst von Fábio F F Garrudo und 9 weiteren Autor:innen. Beteiligte Einrichtung: Instituto de Telecomunicações, Instituto Superior Técnico, Universidade de Lisboa, Avenida Rovisco Pais, 1049-001 Lisboa, Portugal. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 91 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e Tecnologia, FCT—Portuguese Foundation for Science and Technology (FCT/MCTES).
Abstract (Originalsprache)
This study describes, for the first time, the successful incorporation of poly(ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) in Poly(acrylonitrile) (PAN) fibers. While electroconductive PEDOT:PSS is extremely challenging to electrospun into fibers. Therefore, PAN, a polymer easy to electrospun, was chosen as a carrier due to its biocompatibility and tunable chemical stability when cross-linked, particularly using strong acids. PAN:PEDOT:PSS blends, prepared from PEDOT:PSS Clevios PH1000, were electrospun into fibers (PH1000) with a diameter of 515 ± 120 nm, which after being thermally annealed (PH1000 24H) and treated with heated sulfuric acid (PH1000 H2SO4), resulted in fibers with diameters of 437 ± 109 and 940 ± 210 nm, respectively. The fibers obtained over the stepwise process were characterized through infra-red/Raman spectroscopy and cyclic voltammetry. The final fiber meshes showed enhanced electroconductivity (3.2 × 10−3 S cm−1, four-points-assay). Fiber meshes biocompatibility was evaluated using fibroblasts and neural stem cells (NSCs) following, respectively, the ISO10993 guidelines and standard adhesion/proliferation assay. NSCs cultured on PH1000 H2SO4 fibers presented normal morphology and high proliferation rates (0.37 day−1 vs. 0.16 day−1 for culture plate), indicating high biocompatibility for NSCs. Still, the low initial NSC adhesion of 7% calls for improving seeding methodologies. PAN:PEDOT:PSS fibers, here successful produced for the first time, have potential applications in neural tissue engineering and soft electronics.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Instituto de Telecomunicações, Instituto Superior Técnico, Universidade de Lisboa, Avenida Rovisco Pais, 1049-001 Lisboa, Portugal.
- Department of Bioengineering, Instituto Superior Técnico, Universidade de Lisboa, Avenida Rovisco Pais, 1049-001 Lisboa, Portugal.
- iBB-Institute for Bioengineering and Biosciences, Instituto Superior Técnico, Universidade de Lisboa, Avenida Rovisco Pais, 1049-001 Lisboa, Portugal.
- Associate Laboratory i4HB-Institute for Health and Bioeconomy, Avenida Rovisco Pais, 1049-001 Lisboa, Portugal.
- Departament d'Enginyeria Química and Barcelona Research Center for Multiscale Science and Engineering, EEBE, Universitat Politècnica de Catalunya, 08019 Barcelona, Spain.
- Department of Chemical Engineering, Instituto Superior Técnico, Universidade de Lisboa, Avenida Rovisco Pais, 1049-001 Lisboa, Portugal.
ORCID-Profile: Fábio F F Garrudo, Giulia Filippone, Leonor Resina, João C Silva, Luís F V Ferreira, Teresa Esteves, Ana Clara Marques, Frederico Castelo Ferreira
Förderung
- Fundação para a Ciência e Tecnologia
- FCT—Portuguese Foundation for Science and Technology (FCT/MCTES)
Zitieren
APA
Garrudo, F. F. F., Filippone, G., Resina, L., Silva, J. C., Barbosa, F., Ferreira, L. F. V., Esteves, T., Marques, A. C., Morgado, J., & Ferreira, F. C. (2023). Production of Blended Poly(acrylonitrile): Poly(ethylenedioxythiophene):Poly(styrene sulfonate) Electrospun Fibers for Neural Applications. Polymers, 15(13), 2760. https://doi.org/10.3390/polym15132760
Vancouver
Garrudo FFF, Filippone G, Resina L, Silva JC, Barbosa F, Ferreira LFV, et al. Production of Blended Poly(acrylonitrile): Poly(ethylenedioxythiophene):Poly(styrene sulfonate) Electrospun Fibers for Neural Applications. Polymers. 2023;15(13):2760. doi:10.3390/polym15132760
BibTeX
@article{Garrudo2023,
author = {Garrudo, Fábio F F and Filippone, Giulia and Resina, Leonor and Silva, João C and Barbosa, Frederico and Ferreira, Luís F V and Esteves, Teresa and Marques, Ana Clara and Morgado, Jorge and Ferreira, Frederico Castelo},
title = {Production of Blended Poly(acrylonitrile): Poly(ethylenedioxythiophene):Poly(styrene sulfonate) Electrospun Fibers for Neural Applications},
journal = {Polymers},
year = {2023},
volume = {15},
number = {13},
pages = {2760},
doi = {10.3390/polym15132760}
}
EUVIMED