A Review of Critical Issues in High-Speed Vat Photopolymerization
Polymers · 17.06.2023 · 15 (12) · 2716
DOI: 10.3390/polym15122716 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 17.06.2023. Verfasst von Sandeep Kumar Paral und 4 weiteren Autor:innen. Beteiligte Einrichtung: High Speed 3D Printing Research Center, National Taiwan University of Science and Technology, No. 43, Sec. 4, Keelung Rd., Taipei 106, Taiwan. Die Arbeit wurde bisher 111-mal zitiert (Crossref) und nennt 136 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: MINISTRY OF EDUCATION (MOE), TAIWAN, Ministry of Education (MOE).
Abstract (Originalsprache)
Vat photopolymerization (VPP) is an effective additive manufacturing (AM) process known for its high dimensional accuracy and excellent surface finish. It employs vector scanning and mask projection techniques to cure photopolymer resin at a specific wavelength. Among the mask projection methods, digital light processing (DLP) and liquid crystal display (LCD) VPP have gained significant popularity in various industries. To upgrade DLP and LCC VPP into a high-speed process, increasing both the printing speed and projection area in terms of the volumetric print rate is crucial. However, challenges arise, such as the high separation force between the cured part and the interface and a longer resin refilling time. Additionally, the divergence of the light-emitting diode (LED) makes controlling the irradiance homogeneity of large-sized LCD panels difficult, while low transmission rates of near ultraviolet (NUV) impact the processing time of LCD VPP. Furthermore, limitations in light intensity and fixed pixel ratios of digital micromirror devices (DMDs) constrain the increase in the projection area of DLP VPP. This paper identifies these critical issues and provides detailed reviews of available solutions, aiming to guide future research towards developing a more productive and cost-effective high-speed VPP in terms of the high volumetric print rate.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- High Speed 3D Printing Research Center, National Taiwan University of Science and Technology, No. 43, Sec. 4, Keelung Rd., Taipei 106, Taiwan.
- Department of Mechanical Engineering, National Taiwan University of Science and Technology, No. 43, Sec. 4, Keelung Rd., Taipei 106, Taiwan.
- Graduate Institute of Biomedical Engineering, National Taiwan University of Science and Technology, No. 43, Sec. 4, Keelung Rd., Taipei 106, Taiwan.
- Academy of Innovative Semiconductor and Sustainable Manufacturing, National Cheng Kung University, No. 1, University Rd., Tainan 701, Taiwan.
ORCID-Profile: Sandeep Kumar Paral, Ding-Zheng Lin, Yih-Lin Cheng, Shang-Chih Lin, Jeng-Ywan Jeng
Förderung
- MINISTRY OF EDUCATION (MOE), TAIWAN
- Ministry of Education (MOE)
Zitieren
APA
Paral, S. K., Lin, D. Z., Cheng, Y. L., Lin, S. C., & Jeng, J. Y. (2023). A Review of Critical Issues in High-Speed Vat Photopolymerization. Polymers, 15(12), 2716. https://doi.org/10.3390/polym15122716
Vancouver
Paral SK, Lin DZ, Cheng YL, Lin SC, Jeng JY. A Review of Critical Issues in High-Speed Vat Photopolymerization. Polymers. 2023;15(12):2716. doi:10.3390/polym15122716
BibTeX
@article{Paral2023,
author = {Paral, Sandeep Kumar and Lin, Ding-Zheng and Cheng, Yih-Lin and Lin, Shang-Chih and Jeng, Jeng-Ywan},
title = {A Review of Critical Issues in High-Speed Vat Photopolymerization},
journal = {Polymers},
year = {2023},
volume = {15},
number = {12},
pages = {2716},
doi = {10.3390/polym15122716}
}
EUVIMED