EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication, Physical–Chemical and Biological Characterization of Retinol-Loaded Poly(vinyl Alcohol) Electrospun Fiber Mats for Wound Healing Applications

Camilo Zamora-Ledezma iD, Ana Belén Hernández iD, Ivan López-González iD, Jeevithan Elango iD, Janèle Paindépice, Frank Alexis iD, Manuela González-Sánchez iD, Víctor Morales-Flórez iD, Duncan John Mowbray iD, Luis Meseguer-Olmo iD

Polymers · 16.06.2023 · 15 (12) · 2705

DOI: 10.3390/polym15122705 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 16.06.2023. Verfasst von Camilo Zamora-Ledezma und 9 weiteren Autor:innen. Beteiligte Einrichtung: Green and Innovative Technologies for Food, Environment and Bioengineering Research Group (FEnBeT), Faculty of Pharmacy and Nutrition, UCAM-Universid…. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 101 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Internal Research Fund "Convocatoria de Ayudas a la Realización de Proyectos de Grupos de Investigación 2020-2021" of the Universidad Católica de Murcia (UCAM)…, Internal Research Fund “Convocatoria de Ayudas a la Realización de Proyectos de Grupos de Investigación 2020−2021”.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nowadays, there exists a huge interest in producing innovative, high-performance, biofunctional, and cost-efficient electrospun biomaterials based on the association of biocompatible polymers with bioactive molecules. Such materials are well-known to be promising candidates for three-dimensional biomimetic systems for wound healing applications because they can mimic the native skin microenvironment; however, many open questions such as the interaction mechanism between the skin and the wound dressing material remain unclear. Recently, several biomolecules were intended for use in combination with poly(vinyl alcohol) (PVA) fiber mats to improve their biological response; nevertheless, retinol, an important biomolecule, has not been combined yet with PVA to produce tailored and biofunctional fiber mats. Based on the abovementioned concept, the present work reported the fabrication of retinol-loaded PVA electrospun fiber mats (RPFM) with a variable content of retinol (0 ≤ Ret ≤ 25 wt.%), and their physical–chemical and biological characterization. SEM results showed that fiber mats exhibited diameters distribution ranging from 150 to 225 nm and their mechanical properties were affected with the increasing of retinol concentrations. In addition, fiber mats were able to release up to 87% of the retinol depending on both the time and the initial content of retinol. The cell culture results using primary mesenchymal stem cell cultures proved the biocompatibility of RPFM as confirmed by their effects on cytotoxicity (low level) and proliferation (high rate) in a dose-dependent manner. Moreover, the wound healing assay suggested that the optimal RPFM with retinol content of 6.25 wt.% (RPFM-1) enhanced the cell migratory activity without altering its morphology. Accordingly, it is demonstrated that the fabricated RPFM with retinol content below the threshold 0 ≤ Ret ≤ 6.25 wt.% would be an appropriate system for skin regenerative application.

Schlagwörter

Stichwörter der Autor:innen

PVAadult human MSCsdrug releaseretinolwound healing

Autor:innen und Institutionen

  • Green and Innovative Technologies for Food, Environment and Bioengineering Research Group (FEnBeT), Faculty of Pharmacy and Nutrition, UCAM-Universidad Católica de Murcia, Avda, Los Jerónimos 135, Guadalupe de Maciascoq…
  • Tissue Regeneration and Repair Group, Biomaterials and Tissue Engineering, UCAM-Universidad Católica San Antonio de Murcia, Campus de los Jerónimos 135, Guadalupe, 30107 Murcia, Spain.
  • Department of Biomaterials Engineering, Faculty of Health Sciences, UCAM-Universidad Católica San Antonio de Murcia, Campus de los Jerónimos 135, Guadalupe, 30107 Murcia, Spain.
  • École Polytechnique Universitaire D'ingénieurs de Montpellier (POLYTECH), Université de Montpellier, Place Eugène Bataillon, 34095 Montpellier, France.
  • Departmento de Ingenería Química, Colegio de Ciencias y Ingenierias, Universidad San Francisco de Quito (Ecuador), Campus Cumbayá, Diego de Robles s/n, Quito 170901, Ecuador.
  • Department of Physics of Condensed Matter, University of Seville (Spain), Av. Reina Mercedes, s/n, 41012 Seville, Spain.

ORCID-Profile: Camilo Zamora-Ledezma, Ana Belén Hernández, Ivan López-González, Jeevithan Elango, Frank Alexis, Manuela González-Sánchez, Víctor Morales-Flórez, Duncan John Mowbray, Luis Meseguer-Olmo

Förderung

  • Internal Research Fund "Convocatoria de Ayudas a la Realización de Proyectos de Grupos de Investigación 2020-2021" of the Universidad Católica de Murcia (UCAM)…
  • Internal Research Fund “Convocatoria de Ayudas a la Realización de Proyectos de Grupos de Investigación 2020−2021”

Zitieren

APA

Zamora-Ledezma, C., Hernández, A. B., López-González, I., Elango, J., Paindépice, J., Alexis, F., González-Sánchez, M., Morales-Flórez, V., Mowbray, D. J., & Meseguer-Olmo, L. (2023). Fabrication, Physical–Chemical and Biological Characterization of Retinol-Loaded Poly(vinyl Alcohol) Electrospun Fiber Mats for Wound Healing Applications. Polymers, 15(12), 2705. https://doi.org/10.3390/polym15122705

Vancouver

Zamora-Ledezma C, Hernández AB, López-González I, Elango J, Paindépice J, Alexis F, et al. Fabrication, Physical–Chemical and Biological Characterization of Retinol-Loaded Poly(vinyl Alcohol) Electrospun Fiber Mats for Wound Healing Applications. Polymers. 2023;15(12):2705. doi:10.3390/polym15122705

BibTeX
@article{ZamoraLedezma2023,
  author = {Zamora-Ledezma, Camilo and Hernández, Ana Belén and López-González, Ivan and Elango, Jeevithan and Paindépice, Janèle and Alexis, Frank and González-Sánchez, Manuela and Morales-Flórez, Víctor and Mowbray, Duncan John and Meseguer-Olmo, Luis},
  title = {Fabrication, Physical–Chemical and Biological Characterization of Retinol-Loaded Poly(vinyl Alcohol) Electrospun Fiber Mats for Wound Healing Applications},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {12},
  pages = {2705},
  doi = {10.3390/polym15122705}
}
Kostenlos starten →