EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Experimental Investigation of the Mechanical Performance of EPS Foam Core Sandwich Composites Used in Surfboard Design

Sam Crameri iD, Filip Stojcevski, Clara Usma-Mansfield iD

Polymers · 16.06.2023 · 15 (12) · 2703

DOI: 10.3390/polym15122703 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 16.06.2023. Verfasst von Sam Crameri und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering, Deakin University, Geelong, VIC 3216, Australia. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Surfboard manufacturing has begun to utilise Expanded Polystyrene as a core material; however, surf literature relatively ignores this material. This manuscript investigates the mechanical behaviour of Expanded Polystyrene (EPS) sandwich composites. An epoxy resin matrix was used to manufacture ten sandwich-structured composite panels with varying fabric reinforcements (carbon fibre, glass fibre, PET) and two foam densities. The flexural, shear, fracture, and tensile properties were subsequently compared. Under common flexural loading, all composites failed via compression of the core, which is known in surfing terms as creasing. However, crack propagation tests indicated a sudden brittle failure in the E-glass and carbon fibre facings and progressive plastic deformation for the recycled polyethylene terephthalate facings. Testing showed that higher foam density increased the flex and fracture mechanical properties of composites. Overall, the plain weave carbon fibre presented the highest strength composite facing, while the single layer of E-glass was the lowest strength composite. Interestingly, the double-bias weave carbon fibre with a lower-density foam core presented similar stiffness behaviour to standard E-glass surfboard materials. The double-biased carbon also improved the flexural strength (+17%), material toughness (+107%), and fracture toughness (+156%) of the composite compared to E-glass. These findings indicate surfboard manufacturers can utilise this carbon weave pattern to produce surfboards with equal flex behaviour, lower weight and improved resistance to damage in regular loading.

Schlagwörter

Stichwörter der Autor:innen

E-glassEPSPETcarbon fibresandwich compositessurf engineeringsurfboardssurfingthin-walled structures

Autor:innen und Institutionen

  • School of Engineering, Deakin University, Geelong, VIC 3216, Australia.
  • Institute for Frontier Materials, Deakin University, Geelong, VIC 3216, Australia.

ORCID-Profile: Sam Crameri, Clara Usma-Mansfield

Zitieren

APA

Crameri, S., Stojcevski, F., & Usma-Mansfield, C. (2023). An Experimental Investigation of the Mechanical Performance of EPS Foam Core Sandwich Composites Used in Surfboard Design. Polymers, 15(12), 2703. https://doi.org/10.3390/polym15122703

Vancouver

Crameri S, Stojcevski F, Usma-Mansfield C. An Experimental Investigation of the Mechanical Performance of EPS Foam Core Sandwich Composites Used in Surfboard Design. Polymers. 2023;15(12):2703. doi:10.3390/polym15122703

BibTeX
@article{Crameri2023,
  author = {Crameri, Sam and Stojcevski, Filip and Usma-Mansfield, Clara},
  title = {An Experimental Investigation of the Mechanical Performance of EPS Foam Core Sandwich Composites Used in Surfboard Design},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {12},
  pages = {2703},
  doi = {10.3390/polym15122703}
}
Kostenlos starten →