Biomaterials as Implants in the Orthopedic Field for Regenerative Medicine: Metal versus Synthetic Polymers
Polymers · 07.06.2023 · 15 (12) · 2601
DOI: 10.3390/polym15122601 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 07.06.2023. Verfasst von Faisal Dakhelallah Al-Shalawi und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia. Die Arbeit wurde bisher 239-mal zitiert (Crossref) und nennt 267 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universiti Putra Malaysia, Jeju National University.
Abstract (Originalsprache)
Patients suffering bone fractures in different parts of the body require implants that will enable similar function to that of the natural bone that they are replacing. Joint diseases (rheumatoid arthritis and osteoarthritis) also require surgical intervention with implants such as hip and knee joint replacement. Biomaterial implants are utilized to fix fractures or replace parts of the body. For the majority of these implant cases, either metal or polymer biomaterials are chosen in order to have a similar functional capacity to the original bone material. The biomaterials that are employed most often for implants of bone fracture are metals such as stainless steel and titanium, and polymers such as polyethene and polyetheretherketone (PEEK). This review compared metallic and synthetic polymer implant biomaterials that can be employed to secure load-bearing bone fractures due to their ability to withstand the mechanical stresses and strains of the body, with a focus on their classification, properties, and application.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia.
- Research Center Advanced Engineering Materials and Composites (AEMC), Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia.
- Faculty of Applied Energy System, Major of Mechanical Engineering, Jeju National University, 102 Jejudaehak-ro, Jeju-si 63243, Republic of Korea.
- Department of Orthopaedic, Faculty of Medicine and Health Sciences, Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia.
- Advanced Manufacturing Research Centre, and Advanced Processing Technology Research Centre, School of Mechanical and Manufacturing Engineering, Dublin City University, Glasnevin, D09 V209 Dublin 9, Ireland.
- Department of Microbiology, Faculty of Agriculture, Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia.
ORCID-Profile: Faisal Dakhelallah Al-Shalawi, Azmah Hanim Mohamed Ariff, Mohd Khairol Anuar Mohd Ariffin, Dermot Brabazon
Förderung
- Universiti Putra Malaysia
- Jeju National University
Zitieren
APA
Al-Shalawi, F. D., Mohamed Ariff, A. H., Jung, D. W., Mohd Ariffin, M. K. A., Seng Kim, C. L., Brabazon, D., & Al-Osaimi, M. O. (2023). Biomaterials as Implants in the Orthopedic Field for Regenerative Medicine: Metal versus Synthetic Polymers. Polymers, 15(12), 2601. https://doi.org/10.3390/polym15122601
Vancouver
Al-Shalawi FD, Mohamed Ariff AH, Jung DW, Mohd Ariffin MKA, Seng Kim CL, Brabazon D, et al. Biomaterials as Implants in the Orthopedic Field for Regenerative Medicine: Metal versus Synthetic Polymers. Polymers. 2023;15(12):2601. doi:10.3390/polym15122601
BibTeX
@article{AlShalawi2023,
author = {Al-Shalawi, Faisal Dakhelallah and Mohamed Ariff, Azmah Hanim and Jung, Dong-Won and Mohd Ariffin, Mohd Khairol Anuar and Seng Kim, Collin Looi and Brabazon, Dermot and Al-Osaimi, Maha Obaid},
title = {Biomaterials as Implants in the Orthopedic Field for Regenerative Medicine: Metal versus Synthetic Polymers},
journal = {Polymers},
year = {2023},
volume = {15},
number = {12},
pages = {2601},
doi = {10.3390/polym15122601}
}
EUVIMED