EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Elastocaloric Waste/Natural Rubber Materials with Various Crosslink Densities

Nicolas Candau, Adele Zimny, Eduard Vives iD, Maria Lluïsa Maspoch iD

Polymers · 02.06.2023 · 15 (11) · 2566

DOI: 10.3390/polym15112566 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 02.06.2023. Verfasst von Nicolas Candau und 3 weiteren Autor:innen. Beteiligte Einrichtung: Departament de Ciència i Enginyeria de Materials (CEM), Escola d'Enginyeria Barcelona-Est (EEBE), Universitat Politècnica de Catalunya BarcelonaTech …. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Estatal de Investigación, Generalitat de Catalunya, Departament de Recerca i Universitats de la Generalitat de Catalunya.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The characterization of the mechanical behavior of elastocaloric materials is essential to identify their viability in heating/cooling devices. Natural rubber (NR) is a promising elastocaloric (eC) polymer as it requires low external stress to induce a wide temperature span, ΔT. Nonetheless, solutions are needed to further improve DT, especially when targeting cooling applications. To this aim, we designed NR-based materials and optimized the specimen thickness, the density of their chemical crosslinks, and the quantity of ground tire rubber (GTR) used as reinforcing fillers. The eC properties under a single and cyclic loading conditions of the resulting vulcanized rubber composites were investigated via the measure of the heat exchange at the specimen surface using infrared thermography. The highest eC performance was found with the specimen geometry with the lowest thickness (0.6 mm) and a GTR content of 30 wt.%. The maximum temperature span under single interrupted cycle and multiple continuous cycles were equal to 12 °C and 4 °C, respectively. These results were assumed to be related to more homogeneous curing in these materials and to a higher crosslink density and GTR content which both act as nucleating elements for the strain-induced crystallization at the origin of the eC effect. This investigation would be of interest for the design of eC rubber-based composites in eco-friendly heating/cooling devices.

Schlagwörter

Stichwörter der Autor:innen

elastocaloric effectheating/cooling devicesnatural rubberwaste rubber

Autor:innen und Institutionen

  • Departament de Ciència i Enginyeria de Materials (CEM), Escola d'Enginyeria Barcelona-Est (EEBE), Universitat Politècnica de Catalunya BarcelonaTech (UPC), Av. Eduard Maristany 16, 08019 Barcelona, Spain.
  • Departament de Física de la Matèria Condensada, Facultat de Física, Universitat de Barcelona, Martí i Franquès 1-11, 08028 Barcelona, Spain.
  • Institute of Complex Systems (UBICS), University of Barcelona, Martí i Franquès 1-11, 08028 Barcelona, Spain.

ORCID-Profile: Eduard Vives, Maria Lluïsa Maspoch

Förderung

  • Agencia Estatal de Investigación
  • Generalitat de Catalunya
  • Departament de Recerca i Universitats de la Generalitat de Catalunya
  • AEI

Zitieren

APA

Candau, N., Zimny, A., Vives, E., & Maspoch, M. L. (2023). Elastocaloric Waste/Natural Rubber Materials with Various Crosslink Densities. Polymers, 15(11), 2566. https://doi.org/10.3390/polym15112566

Vancouver

Candau N, Zimny A, Vives E, Maspoch ML. Elastocaloric Waste/Natural Rubber Materials with Various Crosslink Densities. Polymers. 2023;15(11):2566. doi:10.3390/polym15112566

BibTeX
@article{Candau2023,
  author = {Candau, Nicolas and Zimny, Adele and Vives, Eduard and Maspoch, Maria Lluïsa},
  title = {Elastocaloric Waste/Natural Rubber Materials with Various Crosslink Densities},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {11},
  pages = {2566},
  doi = {10.3390/polym15112566}
}
Kostenlos starten →