Investigation into the Rheological Properties and Microstructure of Silt/Crumb Rubber Compound-Modified Asphalt
Polymers · 27.05.2023 · 15 (11) · 2474
DOI: 10.3390/polym15112474 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 27.05.2023. Verfasst von Lu Huang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Chang'an University, Xi'an 710018, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Key R&D Program Funding Project of Shaanxi Provincial, Jiangxi Transportation Science and Technology Project.
Abstract (Originalsprache)
Near the coast of China, a large amount of sediment is produced during construction work. In order to mitigate the environmental damage caused by sediment and enhance the performance of rubber-modified asphalt effectively, solidified silt material and waste rubber were prepared to modify asphalt, and its macroscopic properties, such as viscosity and chemical composition, were determined via a routine physical test, DSR, Fourier Transform Infrared Spectroscopy (FTIR), and Fluorescence Microscopy (FM). The results show that, with the increase in powder particles and the addition of a certain amount of hardened mud, the mixing and compaction temperature of modified asphalt can be significantly increased—still reaching the design standard. In addition, the high thermal stability and fatigue resistance of the modified asphalt were clearly better than those of the ordinary asphalt. From the FTIR analysis, rubber particles and hardened silt only exhibited mechanical agitation with the asphalt. Considering that excessive silt might result in the aggregation of matrix asphalt, the addition of an appropriate amount of hardened solidified silt material can eliminate the aggregation. Therefore, the performance of modified asphalt was optimum when solidified silt was added. Our research can provide an effective theoretical basis and reference values for the practical application of compound-modified asphalt. Therefore, 6%HCS(6:4)-CRMA have better performance. Compared to ordinary rubber-modified asphalt, the composite-modified asphalt binder has better physical properties and a more suitable construction temperature. The composite-modified asphalt uses discarded rubber and silt as raw materials, which can effectively protect the environment. Meanwhile, the modified asphalt has excellent rheological properties and fatigue resistance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Chang'an University, Xi'an 710018, China.
ORCID-Profile: Lu Huang
Förderung
- National Natural Science Foundation of China
- Key R&D Program Funding Project of Shaanxi Provincial
- Jiangxi Transportation Science and Technology Project
- Basic Scientific Research of Central Colleges, Chang'an University
- Key R&D Program Funding Project of Shaanxi Provincial
- Special Fund for Basic Scientific Research of Central Colleges, Chang’an University
Zitieren
APA
Huang, L., Geng, J., Chen, M., Niu, Y., Wang, W., & Gao, Z. (2023). Investigation into the Rheological Properties and Microstructure of Silt/Crumb Rubber Compound-Modified Asphalt. Polymers, 15(11), 2474. https://doi.org/10.3390/polym15112474
Vancouver
Huang L, Geng J, Chen M, Niu Y, Wang W, Gao Z. Investigation into the Rheological Properties and Microstructure of Silt/Crumb Rubber Compound-Modified Asphalt. Polymers. 2023;15(11):2474. doi:10.3390/polym15112474
BibTeX
@article{Huang2023,
author = {Huang, Lu and Geng, Jiuguang and Chen, Mingyuan and Niu, Yanhui and Wang, Wenhao and Gao, Zichen},
title = {Investigation into the Rheological Properties and Microstructure of Silt/Crumb Rubber Compound-Modified Asphalt},
journal = {Polymers},
year = {2023},
volume = {15},
number = {11},
pages = {2474},
doi = {10.3390/polym15112474}
}
EUVIMED