EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Properties Optimization of Hybrid Aramid and Jute Fabrics-Reinforced Graphene Nanoplatelets in Functionalized HDPE Matrix Nanocomposites

Ulisses Oliveira Costa, Fabio da Costa Garcia Filho iD, Teresa Gómez-Del Río, João Gabriel Passos Rodrigues, Noan Tonini Simonassi iD, Sergio Neves Monteiro iD, Lucio Fabio Cassiano Nascimento

Polymers · 26.05.2023 · 15 (11) · 2460

DOI: 10.3390/polym15112460 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 26.05.2023. Verfasst von Ulisses Oliveira Costa und 6 weiteren Autor:innen. Beteiligte Einrichtung: Materials Science Department of Military Institute of Engineering-IME, Rio de Janeiro 22290-270, Brazil. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Natural lignocellulosic fibers (NLFs) have been used as a reinforcement for polymer matrix composites in the past couple of decades. Their biodegradability, renewability, and abundance make them appealing for sustainable materials. However, synthetic fibers surpass NLFs in mechanical and thermal properties. Combining these fibers as a hybrid reinforcement in polymeric materials shows promise for multifunctional materials and structures. Functionalizing these composites with graphene-based materials could lead to superior properties. This research optimized the tensile and impact resistance of a jute/aramid/HDPE hybrid nanocomposite by the addition of graphene nanoplatelets (GNP). The hybrid structure with 10 jute/10 aramid layers and 0.10 wt.% GNP exhibited a 2433% increase in mechanical toughness, a 591% increase in tensile strength, and a 462% reduction in ductility compared to neat jute/HDPE composites. A SEM analysis revealed the influence of GNP nano-functionalization on the failure mechanisms of these hybrid nanocomposites.

Schlagwörter

Stichwörter der Autor:innen

aramid fabricgraphene nanoplatelethigh-density polyethylenehybrid nanocompositejute fabric

Autor:innen und Institutionen

  • Materials Science Department of Military Institute of Engineering-IME, Rio de Janeiro 22290-270, Brazil.
  • Durability and Mechanical Integrity of Structural Materials Group (DIMME), School of Experimental Sciences and Technology, Rey Juan Carlos University, C/Tulipán, s/n. Móstoles, 28933 Madrid, Spain.
  • Catalysis Laboratory for Polymerization, Recycling and Biodegradable Polymers (LCPRB), Professor Eloisa Mano Macromolecules Institute-IMA, Rio de Janeiro 21941-598, Brazil.
  • Materials Science Department of State University of Northern Rio de Janeiro-UENF, Campos dos Goytacazes, Rio de Janeiro 28013-602, Brazil.

ORCID-Profile: Fabio da Costa Garcia Filho, Noan Tonini Simonassi, Sergio Neves Monteiro

Zitieren

APA

Costa, U. O., Garcia Filho, F. D. C., Río, T. G., Rodrigues, J. G. P., Simonassi, N. T., Monteiro, S. N., & Nascimento, L. F. C. (2023). Mechanical Properties Optimization of Hybrid Aramid and Jute Fabrics-Reinforced Graphene Nanoplatelets in Functionalized HDPE Matrix Nanocomposites. Polymers, 15(11), 2460. https://doi.org/10.3390/polym15112460

Vancouver

Costa UO, Garcia Filho FDC, Río TG, Rodrigues JGP, Simonassi NT, Monteiro SN, et al. Mechanical Properties Optimization of Hybrid Aramid and Jute Fabrics-Reinforced Graphene Nanoplatelets in Functionalized HDPE Matrix Nanocomposites. Polymers. 2023;15(11):2460. doi:10.3390/polym15112460

BibTeX
@article{Costa2023,
  author = {Costa, Ulisses Oliveira and Garcia Filho, Fabio da Costa and Río, Teresa Gómez-Del and Rodrigues, João Gabriel Passos and Simonassi, Noan Tonini and Monteiro, Sergio Neves and Nascimento, Lucio Fabio Cassiano},
  title = {Mechanical Properties Optimization of Hybrid Aramid and Jute Fabrics-Reinforced Graphene Nanoplatelets in Functionalized HDPE Matrix Nanocomposites},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {11},
  pages = {2460},
  doi = {10.3390/polym15112460}
}
Kostenlos starten →