Development of a New Clay-Based Aerogel Composite from Ball Clay from Piauí, Brazil and Polysaccharides
Polymers · 23.05.2023 · 15 (11) · 2412
DOI: 10.3390/polym15112412 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 23.05.2023. Verfasst von Wilton C Lopes und 7 weiteren Autor:innen. Beteiligte Einrichtung: Research Center on Biodiversity and Biotechnology, BIOTEC, Federal University of Delta of Parnaíba, UFDPar, São Sebastião Avenue, Parnaíba 64202-020,…. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal University of Piauí (UFPI).
Abstract (Originalsprache)
The incorporation of polymeric components into aerogels based on clay produces a significant improvement in the physical and thermal properties of the aerogels. In this study, clay-based aerogels were produced from a ball clay by incorporation of angico gum and sodium alginate using a simple, ecologically acceptable mixing method and freeze-drying. The compression test showed a low density of spongy material. In addition, both the compressive strength and the Young’s modulus of elasticity of the aerogels showed a progression associated to the decrease in pH. The microstructural characteristics of the aerogels were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The chemical structure was studied by infrared spectroscopy with Fourier transform (FTIR). The TGA curves from a non-oxidizing atmosphere indicated that the clay had a mass loss of 9% above 500 °C and that due to the presence of polysaccharides, the aerogels presented a decomposition of 20% at temperatures above 260 °C. The DSC curves of the aerogels demonstrated a displacement in higher temperatures. In conclusion, the results showed that aerogels of ball clay with the incorporation of polysaccharides, which are still minimally studied, have potential application as thermal insulation considering the mechanical and thermal results obtained.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Research Center on Biodiversity and Biotechnology, BIOTEC, Federal University of Delta of Parnaíba, UFDPar, São Sebastião Avenue, Parnaíba 64202-020, PI, Brazil.
- Postgraduate Program in Materials Engineering, Federal Institute of Piaui (IFPI), Campus Teresina Central, Teresina 64001-270, PI, Brazil.
- LIMAV, Interdisciplinary Laboratory of Advanced Materials, Piauí Federal University, Teresina 64049-550, PI, Brazil.
ORCID-Profile: Wilton C Lopes, Francisco M Brito, Alyne R Araújo, Vicente G Freitas Viana, Edson C Silva-Filho
Förderung
- Federal University of Piauí (UFPI)
Zitieren
APA
Lopes, W. C., Brito, F. M., Neto, F. E., Araújo, A. R., Leite, R. C., Viana, V. G. F., Silva-Filho, E. C., & Silva, D. A. (2023). Development of a New Clay-Based Aerogel Composite from Ball Clay from Piauí, Brazil and Polysaccharides. Polymers, 15(11), 2412. https://doi.org/10.3390/polym15112412
Vancouver
Lopes WC, Brito FM, Neto FE, Araújo AR, Leite RC, Viana VGF, et al. Development of a New Clay-Based Aerogel Composite from Ball Clay from Piauí, Brazil and Polysaccharides. Polymers. 2023;15(11):2412. doi:10.3390/polym15112412
BibTeX
@article{Lopes2023,
author = {Lopes, Wilton C and Brito, Francisco M and Neto, Francisco E and Araújo, Alyne R and Leite, Rodolpho C and Viana, Vicente G Freitas and Silva-Filho, Edson C and Silva, Durcilene A},
title = {Development of a New Clay-Based Aerogel Composite from Ball Clay from Piauí, Brazil and Polysaccharides},
journal = {Polymers},
year = {2023},
volume = {15},
number = {11},
pages = {2412},
doi = {10.3390/polym15112412}
}
EUVIMED