EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effects of Cross-Linking Agents on the Mechanical Properties of Poly (Methyl Methacrylate) Resin

Gulsum Ceylan iD, Serkan Emik, Tuncer Yalcinyuva, Emin Sunbuloğlu, Ergun Bozdag, Fatma Unalan

Polymers · 19.05.2023 · 15 (10) · 2387

DOI: 10.3390/polym15102387 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 19.05.2023. Verfasst von Gulsum Ceylan und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, School of Dentistry, Istanbul Medipol University, Istanbul 34083, Turkey. Die Arbeit wurde bisher 46-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cross-linking agents are incorporated into denture base materials to improve their mechanical properties. This study investigated the effects of various cross-linking agents, with different cross-linking chain lengths and flexibilities, on the flexural strength, impact strength, and surface hardness of polymethyl methacrylate (PMMA). The cross-linking agents used were ethylene glycol dimethacrylate (EGDMA), tetraethylene glycol dimethacrylate (TEGDMA), tetraethylene glycol diacrylate (TEGDA), and polyethylene glycol dimethacrylate (PEGDMA). These agents were added to the methyl methacrylate (MMA) monomer component in concentrations of 5%, 10%, 15%, and 20% by volume and 10% by molecular weight. A total of 630 specimens, comprising 21 groups, were fabricated. Flexural strength and elastic modulus were assessed using a 3-point bending test, impact strength was measured via the Charpy type test, and surface Vickers hardness was determined. Statistical analyses were performed using the Kolmogorov–Smirnov Test, Kruskal–Wallis Test, Mann–Whitney U Test, and ANOVA with post hoc Tamhane test (p ≤ 0.05). No significant increase in flexural strength, elastic modulus, or impact strength was observed in the cross-linking groups compared to conventional PMMA. However, surface hardness values notably decreased with the addition of 5% to 20% PEGDMA. The incorporation of cross-linking agents in concentrations ranging from 5% to 15% led to an improvement in the mechanical properties of PMMA.

Schlagwörter

Stichwörter der Autor:innen

cross-linking agentdenture base polymersflexural strengthimpact strengthsurface hardness

Autor:innen und Institutionen

  • Department of Prosthodontics, School of Dentistry, Istanbul Medipol University, Istanbul 34083, Turkey.
  • Department of Chemical Engineering, Faculty of Engineering, Istanbul University-Cerrahpasa, Istanbul 34320, Turkey.
  • Department of Mechanical Engineering, Laboratory of Biomechanics & Mechanics of Materials, Faculty of Engineering, Istanbul Technical University, Istanbul 34437, Turkey.
  • Department of Prosthodontics, Faculty of Dentistry, Istanbul Kent University, Istanbul 34433, Turkey.

ORCID-Profile: Gulsum Ceylan

Zitieren

APA

Ceylan, G., Emik, S., Yalcinyuva, T., Sunbuloğlu, E., Bozdag, E., & Unalan, F. (2023). The Effects of Cross-Linking Agents on the Mechanical Properties of Poly (Methyl Methacrylate) Resin. Polymers, 15(10), 2387. https://doi.org/10.3390/polym15102387

Vancouver

Ceylan G, Emik S, Yalcinyuva T, Sunbuloğlu E, Bozdag E, Unalan F. The Effects of Cross-Linking Agents on the Mechanical Properties of Poly (Methyl Methacrylate) Resin. Polymers. 2023;15(10):2387. doi:10.3390/polym15102387

BibTeX
@article{Ceylan2023,
  author = {Ceylan, Gulsum and Emik, Serkan and Yalcinyuva, Tuncer and Sunbuloğlu, Emin and Bozdag, Ergun and Unalan, Fatma},
  title = {The Effects of Cross-Linking Agents on the Mechanical Properties of Poly (Methyl Methacrylate) Resin},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {10},
  pages = {2387},
  doi = {10.3390/polym15102387}
}
Kostenlos starten →