Biocompatible and Biodegradable 3D Printing from Bioplastics: A Review
Polymers · 18.05.2023 · 15 (10) · 2355
DOI: 10.3390/polym15102355 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 18.05.2023. Verfasst von Maurine Naliaka Andanje und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechatronic Engineering, Jomo Kenyatta University of Agriculture and Technology (JKUAT), Nairobi 00200, Kenya. Die Arbeit wurde bisher 91-mal zitiert (Crossref) und nennt 166 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: École Polytechnique Fédérale de Lausanne.
Abstract (Originalsprache)
There has been a lot of interest in developing and producing biodegradable polymers to address the current environmental problem caused by the continued usage of synthetic polymers derived from petroleum products. Bioplastics have been identified as a possible alternative to the use of conventional plastics since they are biodegradable and/or derived from renewable resources. Additive manufacturing, also referred to as 3D printing, is a field of growing interest and can contribute towards a sustainable and circular economy. The manufacturing technology also provides a wide material selection with design flexibility increasing its usage in the manufacture of parts from bioplastics. With this material flexibility, efforts have been directed towards developing 3D printing filaments from bioplastics such as Poly (lactic acid) to substitute the common fossil- based conventional plastic filaments such as Acrylonitrile butadiene styrene. Plant biomass is now utilized in the development of biocomposite materials. A lot of literature presents work done toward improving the biodegradability of printing filaments. However, additive manufacture of biocomposites from plant biomass is faced with printing challenges such as warping, low agglomeration between layers and poor mechanical properties of the printed parts. The aim of this paper is to review the technology of 3D printing using bioplastics, study the materials that have been utilized in this technology and how challenges of working with biocomposites in additive manufacture have been addressed.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechatronic Engineering, Jomo Kenyatta University of Agriculture and Technology (JKUAT), Nairobi 00200, Kenya.
- Department of Mechanical Engineering, Jomo Kenyatta University of Agriculture and Technology (JKUAT), Nairobi 00200, Kenya.
- Institute of Electrical and Micro Engineering, École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland.
ORCID-Profile: Maurine Naliaka Andanje, Bruno Roberts Mose
Förderung
- École Polytechnique Fédérale de Lausanne
Zitieren
APA
Andanje, M. N., Mwangi, J. W., Mose, B. R., & Carrara, S. (2023). Biocompatible and Biodegradable 3D Printing from Bioplastics: A Review. Polymers, 15(10), 2355. https://doi.org/10.3390/polym15102355
Vancouver
Andanje MN, Mwangi JW, Mose BR, Carrara S. Biocompatible and Biodegradable 3D Printing from Bioplastics: A Review. Polymers. 2023;15(10):2355. doi:10.3390/polym15102355
BibTeX
@article{Andanje2023,
author = {Andanje, Maurine Naliaka and Mwangi, James Wamai and Mose, Bruno Roberts and Carrara, Sandro},
title = {Biocompatible and Biodegradable 3D Printing from Bioplastics: A Review},
journal = {Polymers},
year = {2023},
volume = {15},
number = {10},
pages = {2355},
doi = {10.3390/polym15102355}
}
EUVIMED