EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Recycling PET Fabric and Bottle Grade on r-PET Fiber Structure

Nanjaporn Roungpaisan, Natee Srisawat, Nattadon Rungruangkitkrai, Nawarat Chartvivatpornchai, Jirachaya Boonyarit, Thorsak Kittikorn, Rungsima Chollakup iD

Polymers · 17.05.2023 · 15 (10) · 2330

DOI: 10.3390/polym15102330 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 17.05.2023. Verfasst von Nanjaporn Roungpaisan und 6 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Engineering, Rajamangala University of Technology Thanyaburi, Pathum Thani 12110, Thailand. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kasetsart University Research and Development Institute (KURDI),.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PET knitted fabric was melted and cooled by hot pressing at 250 °C to obtain a compacted sheet. Only white PET fabric (WF_PET) was used to study the recycling process by compression and grinding to powder and then melt spinning at different take-up speeds compared to PET bottle grade (BO_PET). PET knitted fabric had good fiber formability and was better suited for melt spinning of recycled PET (r-PET) fibers than the bottle grade. Thermal and mechanical properties of r-PET fibers improved in terms of crystallinity and tensile strength with increasing take-up speed (500 to 1500 m/min). Fading and color changes from the original fabric were relatively small compared with PET bottle grade. Results indicated that fiber structure and properties can be used as a guideline for improving and developing r-PET fibers from textile waste.

Schlagwörter

Stichwörter der Autor:innen

PET bottle resinPET knitted fabriccompressionmelt spinningtake-up speed

Autor:innen und Institutionen

  • Faculty of Engineering, Rajamangala University of Technology Thanyaburi, Pathum Thani 12110, Thailand.
  • Department of Textile Science, Faculty of Agro-Industry, Kasetsart University, Bangkok 10900, Thailand.
  • Kasetsart Agricultural and Agro-Industrial Product Improvement Institute (KAPI), Kasetsart University, Bangkok 10900, Thailand.
  • Division of Physical Science, Faculty of Science, Prince of Songkla University, Songkhla 90110, Thailand.

ORCID-Profile: Rungsima Chollakup

Förderung

  • Kasetsart University Research and Development Institute (KURDI),

Zitieren

APA

Roungpaisan, N., Srisawat, N., Rungruangkitkrai, N., Chartvivatpornchai, N., Boonyarit, J., Kittikorn, T., & Chollakup, R. (2023). Effect of Recycling PET Fabric and Bottle Grade on r-PET Fiber Structure. Polymers, 15(10), 2330. https://doi.org/10.3390/polym15102330

Vancouver

Roungpaisan N, Srisawat N, Rungruangkitkrai N, Chartvivatpornchai N, Boonyarit J, Kittikorn T, et al. Effect of Recycling PET Fabric and Bottle Grade on r-PET Fiber Structure. Polymers. 2023;15(10):2330. doi:10.3390/polym15102330

BibTeX
@article{Roungpaisan2023,
  author = {Roungpaisan, Nanjaporn and Srisawat, Natee and Rungruangkitkrai, Nattadon and Chartvivatpornchai, Nawarat and Boonyarit, Jirachaya and Kittikorn, Thorsak and Chollakup, Rungsima},
  title = {Effect of Recycling PET Fabric and Bottle Grade on r-PET Fiber Structure},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {10},
  pages = {2330},
  doi = {10.3390/polym15102330}
}
Kostenlos starten →