EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Calculation of Strain Energy Density Function Using Ogden Model and Mooney–Rivlin Model Based on Biaxial Elongation Experiments of Silicone Rubber

Yoshihiro Yamashita, Hideyuki Uematsu, Shuichi Tanoue

Polymers · 11.05.2023 · 15 (10) · 2266

DOI: 10.3390/polym15102266 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 11.05.2023. Verfasst von Yoshihiro Yamashita und 2 weiteren Autor:innen. Beteiligte Einrichtung: Research Center for Fibers and Materials, University of Fukui, Fukui 9110-8507, Japan. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Strain energy density functions are used in CAE analysis of hyperelastic materials such as rubber and elastomers. This function can originally be obtained only by experiments using biaxial deformation, but the difficulty of such experiments has made it almost impossible to put the function to practical use. Furthermore, it has been unclear how to introduce the strain energy density function necessary for CAE analysis from the results of biaxial deformation experiments on rubber. In this study, parameters of the Ogden and Mooney–Rivlin approximations of the strain energy density function were derived from the results of biaxial deformation experiments on silicone rubber, and their validity was verified. These results showed that it is best to determine the coefficients of the approximate equations for the strain energy density function after 10 cycles of repeated elongation of rubber in an equal biaxial deformation state, followed by equal biaxial elongation, uniaxial constrained biaxial elongation, and uniaxial elongation to obtain these three stress–strain curves.

Schlagwörter

Stichwörter der Autor:innen

FEMbiaxial deformationhyperelasticnonlinearstrain energy density function

Autor:innen und Institutionen

  • Research Center for Fibers and Materials, University of Fukui, Fukui 9110-8507, Japan.
  • Frontier Fiber Technology and Science Faculty of Engineering, University of Fukui, Fukui 9910-8507, Japan.

Zitieren

APA

Yamashita, Y., Uematsu, H., & Tanoue, S. (2023). Calculation of Strain Energy Density Function Using Ogden Model and Mooney–Rivlin Model Based on Biaxial Elongation Experiments of Silicone Rubber. Polymers, 15(10), 2266. https://doi.org/10.3390/polym15102266

Vancouver

Yamashita Y, Uematsu H, Tanoue S. Calculation of Strain Energy Density Function Using Ogden Model and Mooney–Rivlin Model Based on Biaxial Elongation Experiments of Silicone Rubber. Polymers. 2023;15(10):2266. doi:10.3390/polym15102266

BibTeX
@article{Yamashita2023,
  author = {Yamashita, Yoshihiro and Uematsu, Hideyuki and Tanoue, Shuichi},
  title = {Calculation of Strain Energy Density Function Using Ogden Model and Mooney–Rivlin Model Based on Biaxial Elongation Experiments of Silicone Rubber},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {10},
  pages = {2266},
  doi = {10.3390/polym15102266}
}
Kostenlos starten →