EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Exploration of Breakdown Strength Decrease and Mitigation of Ultrathin Polypropylene

Daniel Q Tan iD, Yichen Liu iD, Xiaotian Lin, Enling Huang, Xi Lin iD, Xudong Wu, Jintao Lin, Ronghai Luo, Tianxiang Wang

Polymers · 10.05.2023 · 15 (10) · 2257

DOI: 10.3390/polym15102257 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 10.05.2023. Verfasst von Daniel Q Tan und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Guangdong Technion-Israel Institute of Technology, 241 Daxue Road, Shantou 515063, China. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Science and Technology Department, Guangdong Department of Science and Technology Specialized Fund, Guangdong Province Science and Technology Department Major Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polypropylene film is the most important organic dielectric in capacitor technology; however, applications such as power electronic devices require more miniaturized capacitors and thinner dielectric films. The commercial biaxially oriented polypropylene film is losing the advantage of its high breakdown strength as it becomes thinner. This work carefully studies the breakdown strength of the film between 1 and 5 microns. The breakdown strength drops rapidly and hardly ensures that the capacitor reaches a volumetric energy density of 2 J/cm3. Differential scanning calorimetry, X-ray, and SEM analyses showed that this phenomenon has nothing to do with the crystallographic orientation and crystallinity of the film but is closely related to the non-uniform fibers and many voids produced by overstretching the film. Measures must be taken to avoid their premature breakdown due to high local electric fields. An improvement below 5 microns will maintain a high energy density and the important application of polypropylene films in capacitors. Without destroying the physical properties of commercial films, this work employs the ALD oxide coating scheme to augment the dielectric strength of a BOPP in the thickness range below 5 μm, especially its high temperature performance. Therefore, the problem of the reduction in dielectric strength and energy density caused by BOPP thinning can be alleviated.

Schlagwörter

Stichwörter der Autor:innen

breakdown strengthcapacitorfilm stretchingfilm thicknesspolymer

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, Guangdong Technion-Israel Institute of Technology, 241 Daxue Road, Shantou 515063, China.
  • Guangdong Provincial Key Laboratory of Materials and Technologies for Energy Conversion, Guangdong Technion-Israel Institute of Technology, 241 Daxue Road, Shantou 515063, China.
  • Department of Materials Science and Engineering, Technion-Israel Institute of Technology, Haifa 3200003, Israel.
  • Xiamen Faratronic Ltd., Co., Xiamen 361028, China.

ORCID-Profile: Daniel Q Tan, Yichen Liu, Xi Lin

Förderung

  • Guangdong Science and Technology Department
  • Guangdong Department of Science and Technology Specialized Fund
  • Guangdong Province Science and Technology Department Major Project

Zitieren

APA

Tan, D. Q., Liu, Y., Lin, X., Huang, E., Lin, X., Wu, X., Lin, J., Luo, R., & Wang, T. (2023). Exploration of Breakdown Strength Decrease and Mitigation of Ultrathin Polypropylene. Polymers, 15(10), 2257. https://doi.org/10.3390/polym15102257

Vancouver

Tan DQ, Liu Y, Lin X, Huang E, Lin X, Wu X, et al. Exploration of Breakdown Strength Decrease and Mitigation of Ultrathin Polypropylene. Polymers. 2023;15(10):2257. doi:10.3390/polym15102257

BibTeX
@article{Tan2023,
  author = {Tan, Daniel Q and Liu, Yichen and Lin, Xiaotian and Huang, Enling and Lin, Xi and Wu, Xudong and Lin, Jintao and Luo, Ronghai and Wang, Tianxiang},
  title = {Exploration of Breakdown Strength Decrease and Mitigation of Ultrathin Polypropylene},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {10},
  pages = {2257},
  doi = {10.3390/polym15102257}
}
Kostenlos starten →