EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of the Effects of Chain Extender on Material Properties of PLA/PCL and PLA/PEG Blends: Comparative Study between Polycaprolactone and Polyethylene Glycol

Karabo Innocent Matumba iD, Mpho Phillip Motloung, Vincent Ojijo, Suprakas Sinha Ray iD, Emmanuel Rotimi Sadiku iD

Polymers · 08.05.2023 · 15 (9) · 2230

DOI: 10.3390/polym15092230 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 08.05.2023. Verfasst von Karabo Innocent Matumba und 4 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Nanostructures and Advanced Materials, DSI-CSIR Nanotechnology Innovation Centre, Council for Scientific and Industrial Research, Pretoria…. Die Arbeit wurde bisher 46-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Science and Innovation, Council for Scientific and Industrial Research, Tshwane University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the effect of the Joncryl concentration on the properties of polylactide/poly(ε-caprolactone) (PLA/PCL) and PLA/poly(ethylene glycol) (PEG) blends. The addition of Joncryl influenced the properties of both PLA-based blends. In the blend of PLA/PCL blends, the addition of Joncryl reduced the size of PCL droplets, which implies the compatibility of the two phases, while PLA/PEG blends showed a co-continuous type of morphology at 0.1% and 0.3 wt.% of Joncryl loading. The crystallinity of PCL and PEG was studied on both PLA/PCL and PLA/PEG blend systems. In both scenarios, the crystallinity of the blends decreased upon the addition of Joncryl. Thermal stabilities were shown to depend on the addition of Joncryl. The toughness increased when 0.5 wt.% of Joncryl was added to both systems. However, the stiffness of PLA/PCL decreased, while the stiffness of PLA/PEG increased with the increasing concentration of Joncryl. This study provides new insight into the effect of chain extenders on the compatibility of PLA-based blends.

Schlagwörter

Stichwörter der Autor:innen

PCLPEGPLAblendschain extendermechanical propertiesmorphology

Autor:innen und Institutionen

  • Centre for Nanostructures and Advanced Materials, DSI-CSIR Nanotechnology Innovation Centre, Council for Scientific and Industrial Research, Pretoria 0001, South Africa.
  • Institute of NanoEngineering Research, Department of Chemical, Metallurgical and Materials Engineering (Polymer Division), Tshwane University of Technology, Pretoria 0001, South Africa.
  • Department of Chemical Sciences, University of Johannesburg, Johannesburg 2028, South Africa.

ORCID-Profile: Karabo Innocent Matumba, Suprakas Sinha Ray, Emmanuel Rotimi Sadiku

Förderung

  • Department of Science and Innovation
  • Council for Scientific and Industrial Research
  • Tshwane University of Technology
  • Council for Scientific and Industrial Research, South Africa

Zitieren

APA

Matumba, K. I., Motloung, M. P., Ojijo, V., Ray, S. S., & Sadiku, E. R. (2023). Investigation of the Effects of Chain Extender on Material Properties of PLA/PCL and PLA/PEG Blends: Comparative Study between Polycaprolactone and Polyethylene Glycol. Polymers, 15(9), 2230. https://doi.org/10.3390/polym15092230

Vancouver

Matumba KI, Motloung MP, Ojijo V, Ray SS, Sadiku ER. Investigation of the Effects of Chain Extender on Material Properties of PLA/PCL and PLA/PEG Blends: Comparative Study between Polycaprolactone and Polyethylene Glycol. Polymers. 2023;15(9):2230. doi:10.3390/polym15092230

BibTeX
@article{Matumba2023,
  author = {Matumba, Karabo Innocent and Motloung, Mpho Phillip and Ojijo, Vincent and Ray, Suprakas Sinha and Sadiku, Emmanuel Rotimi},
  title = {Investigation of the Effects of Chain Extender on Material Properties of PLA/PCL and PLA/PEG Blends: Comparative Study between Polycaprolactone and Polyethylene Glycol},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {9},
  pages = {2230},
  doi = {10.3390/polym15092230}
}
Kostenlos starten →