Evolutionary Multi-Objective Optimization of Extrusion Barrier Screws: Data Mining and Decision Making
Polymers · 07.05.2023 · 15 (9) · 2212
DOI: 10.3390/polym15092212 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 07.05.2023. Verfasst von António Gaspar-Cunha und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Polymers and Composites, University of Minho, 4710-057 Braga, Portugal. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e Tecnologia, POR Norte, São Paulo Research Foundation.
Abstract (Originalsprache)
Polymer single-screw extrusion is a major industrial processing technique used to obtain plastic products. To assure high outputs, tight dimensional tolerances, and excellent product performance, extruder screws may show different design characteristics. Barrier screws, which contain a second flight in the compression zone, have become quite popular as they promote and stabilize polymer melting. Therefore, it is important to design efficient extruder screws and decide whether a conventional screw will perform the job efficiently, or a barrier screw should be considered instead. This work uses multi-objective evolutionary algorithms to design conventional and barrier screws (Maillefer screws will be studied) with optimized geometry. The processing of two polymers, low-density polyethylene and polypropylene, is analyzed. A methodology based on the use of artificial intelligence (AI) techniques, namely, data mining, decision making, and evolutionary algorithms, is presented and utilized to obtain results with practical significance, based on relevant performance measures (objectives) used in the optimization. For the various case studies selected, Maillefer screws were generally advantageous for processing LDPE, while for PP, the use of both types of screws would be feasible.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Polymers and Composites, University of Minho, 4710-057 Braga, Portugal.
- Institute of Mathematics and Computer Science, University of São Paulo, São Paulo 05508-060, Brazil.
- Portuguese Footwear Research and Technology Centre, 3700-121 São João da Madeira, Portugal.
ORCID-Profile: António Gaspar-Cunha, Alexandre Delbem, Francisco Monaco, José Covas
Förderung
- Fundação para a Ciência e Tecnologia
- POR Norte
- São Paulo Research Foundation
- FEDER funds through the COMPETE 2020 Program and National Funds through FCT (Portuguese Foundation for Science and Technology)
Zitieren
APA
Gaspar-Cunha, A., Costa, P., Delbem, A., Monaco, F., Ferreira, M. J., & Covas, J. (2023). Evolutionary Multi-Objective Optimization of Extrusion Barrier Screws: Data Mining and Decision Making. Polymers, 15(9), 2212. https://doi.org/10.3390/polym15092212
Vancouver
Gaspar-Cunha A, Costa P, Delbem A, Monaco F, Ferreira MJ, Covas J. Evolutionary Multi-Objective Optimization of Extrusion Barrier Screws: Data Mining and Decision Making. Polymers. 2023;15(9):2212. doi:10.3390/polym15092212
BibTeX
@article{GasparCunha2023,
author = {Gaspar-Cunha, António and Costa, Paulo and Delbem, Alexandre and Monaco, Francisco and Ferreira, Maria José and Covas, José},
title = {Evolutionary Multi-Objective Optimization of Extrusion Barrier Screws: Data Mining and Decision Making},
journal = {Polymers},
year = {2023},
volume = {15},
number = {9},
pages = {2212},
doi = {10.3390/polym15092212}
}
EUVIMED