EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synergistic Effect of Activated Carbon, NiO and Al2O3 on Improving the Thermal Stability and Flame Retardancy of Polypropylene Composites

Mingqiang Shao, Ying Li, Yiran Shi, Jiangtao Liu, Baoxia Xue iD, Mei Niu

Polymers · 29.04.2023 · 15 (9) · 2135

DOI: 10.3390/polym15092135 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 29.04.2023. Verfasst von Mingqiang Shao und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Textile Engineering, Taiyuan University of Technology, Taiyuan 030600, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Foundation of Taiyuan University of Technology, grant number, Science and technology innovation project of colleges and universities in Shanxi Province, Foundation of Taiyuan University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

It is difficult to enhance the char yields of polypropylene (PP) due to the preferential complete combustion. Successful formation of abundant char layer structure of PP upon flammability was obtained due to the synergistic effect of NiO, Al2O3 and activated carbon (AC). From characterization of scanning electron microscopy (SEM) and transmission electron microscopy (TEM), it was revealed that the microstructure of residual char contained large amount of carbon nanotubes. Compared to the modification of AC, NiO and Al2O3 alone, the combination of AC, NiO and Al2O3 dramatically promotes the charring ability of PP. In the case of AC and NiO, NiO plays a role of dehydrogenation, resulting in the degradation product, while AC mainly acts as carbonization promoter. The addition of Al2O3 results in higher dispersion and smaller particle size of NiO, leading to greater exposure of active sites of NiO and higher dehydrogenation and carbonization activity. Compared to the neat PP, the decomposition temperature of the PP modified by combined AC, NiO and Al2O3 was increased by 90 ℃. The yield of residual char of AC-5Ni-Al-PP reached as high as 44.6%. From the cone calorimeter test, the heat release rate per unit area (HRR) and total heat release per unit area (THR) of PP composite follows the order AC-5Ni-Al-PP < AC-10Ni-Al-PP < AC-Ni-PP < AC-15Ni-Al-PP < AC-1Ni-Al-PP. Compared to the neat PP, the peak of HRR declined by 73.8%, 72.7%, 71.3%, 67.6% and 62.5%, respectively.

Schlagwörter

Stichwörter der Autor:innen

Al2O3NiOactivated carboncarbon nanotubesflame retardancypolypropylene compositesthermal stability

Autor:innen und Institutionen

  • College of Textile Engineering, Taiyuan University of Technology, Taiyuan 030600, China.
  • College of Chemical Engineering and Technology, Taiyuan University of Technology, Taiyuan 030024, China.

ORCID-Profile: Baoxia Xue

Förderung

  • Foundation of Taiyuan University of Technology, grant number
  • Science and technology innovation project of colleges and universities in Shanxi Province
  • Foundation of Taiyuan University of Technology
  • Shanxi Scholarship Council of China

Zitieren

APA

Shao, M., Li, Y., Shi, Y., Liu, J., Xue, B., & Niu, M. (2023). Synergistic Effect of Activated Carbon, NiO and Al2O3 on Improving the Thermal Stability and Flame Retardancy of Polypropylene Composites. Polymers, 15(9), 2135. https://doi.org/10.3390/polym15092135

Vancouver

Shao M, Li Y, Shi Y, Liu J, Xue B, Niu M. Synergistic Effect of Activated Carbon, NiO and Al2O3 on Improving the Thermal Stability and Flame Retardancy of Polypropylene Composites. Polymers. 2023;15(9):2135. doi:10.3390/polym15092135

BibTeX
@article{Shao2023,
  author = {Shao, Mingqiang and Li, Ying and Shi, Yiran and Liu, Jiangtao and Xue, Baoxia and Niu, Mei},
  title = {Synergistic Effect of Activated Carbon, NiO and Al2O3 on Improving the Thermal Stability and Flame Retardancy of Polypropylene Composites},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {9},
  pages = {2135},
  doi = {10.3390/polym15092135}
}
Kostenlos starten →