EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Evaluation of New Geopolymer Composite with Inclusion of Slag and Construction Waste Firebrick at Elevated Temperatures

Ozer Sevim iD, Ilhami Demir iD, Erdinc Halis Alakara iD, İsmail Raci Bayer

Polymers · 29.04.2023 · 15 (9) · 2127

DOI: 10.3390/polym15092127 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 29.04.2023. Verfasst von Ozer Sevim und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Kırıkkale University, Kırıkkale 71450, Turkey. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the effect of elevated temperatures on slag-based geopolymer composites (SGC) with the inclusion of firebrick powder (FBP). There is a limited understanding of the properties of SGC with the inclusion of FBP when exposed to elevated temperatures and the effects of cooling processes in air and water. In this regard, in the preliminary trials performed, optimum molarity, curing temperature, and curing time conditions were determined as 16 molarity, 100 °C, and 24 h, respectively, for SGCs. Then, FBP from construction and demolition waste (CDW) was substituted in different replacement ratios (10%, 20%, 30%, and 40% by slag weight) into the SGC, with optimum molarity, curing temperature, and curing time. The produced SGC samples were exposed to elevated temperature effects at 300, 600, and 800 °C and then subjected to air- and water-cooling regimes. The ultrasonic pulse velocity, flexural strength, compressive strength, and mass loss of the SGCs with the inclusion of FBP were determined. In addition, scanning electron microscopy (SEM) analyses were carried out for control (without FBP) and 20% FBP-based SGC cooled in air and water after elevated temperatures of 300 °C and 600 °C. The results show that the compressive and flexural strength of the SGC samples are higher than the control samples when the FBP replacement ratio is used of up to 30% for the samples after the elevated temperatures of 300 °C and 600 °C. The lowest compressive and flexural strength results were obtained for the control samples after a temperature of 800 °C. As a result, the elevated temperature resistance can be significantly improved if FBP is used in SGC by up to 30%.

Schlagwörter

Stichwörter der Autor:innen

different cooling regimeselevated temperature effectfirebrick powdergeopolymermechanical properties

Autor:innen und Institutionen

  • Department of Civil Engineering, Kırıkkale University, Kırıkkale 71450, Turkey.
  • Department of Civil Engineering, Tokat Gaziosmanpasa University, Tokat 60150, Turkey.
  • Institute of Science, Kırıkkale University, Kırıkkale 71450, Turkey.

ORCID-Profile: Ozer Sevim, Ilhami Demir, Erdinc Halis Alakara

Zitieren

APA

Sevim, O., Demir, I., Alakara, E. H., & Bayer, İ. R. (2023). Experimental Evaluation of New Geopolymer Composite with Inclusion of Slag and Construction Waste Firebrick at Elevated Temperatures. Polymers, 15(9), 2127. https://doi.org/10.3390/polym15092127

Vancouver

Sevim O, Demir I, Alakara EH, Bayer İR. Experimental Evaluation of New Geopolymer Composite with Inclusion of Slag and Construction Waste Firebrick at Elevated Temperatures. Polymers. 2023;15(9):2127. doi:10.3390/polym15092127

BibTeX
@article{Sevim2023,
  author = {Sevim, Ozer and Demir, Ilhami and Alakara, Erdinc Halis and Bayer, İsmail Raci},
  title = {Experimental Evaluation of New Geopolymer Composite with Inclusion of Slag and Construction Waste Firebrick at Elevated Temperatures},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {9},
  pages = {2127},
  doi = {10.3390/polym15092127}
}
Kostenlos starten →