Toughening Polylactide Stereocomplex by Injection Molding with Thermoplastic Starch and Chain Extender
Polymers · 26.04.2023 · 15 (9) · 2055
DOI: 10.3390/polym15092055 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 26.04.2023. Verfasst von Yottha Srithep und 5 weiteren Autor:innen. Beteiligte Einrichtung: Manufacturing and Materials Research Unit, Department of Manufacturing Engineering, Faculty of Engineering, Mahasarakham University, Mahasarakham 441…. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Mahasarakham University, Faculty of Engineering, Mahasarakham University.
Abstract (Originalsprache)
The high cost, low heat resistance, and brittleness of poly(L-lactide) (PLLA) is a significant drawback that inhibits its diffusion into many industrial applications. These weaknesses were solved by forming a polylactide stereocomplex (ST) and blending it with thermoplastic starch (TPS). We blended poly (L-lactide)(PLLA), up to 30% thermoplastic starch, and a chain extender (2%) in an internal mixer, which was then hand-mixed with poly (D-lactide)(PDLA) and injection molded to form specimens, in order to study mechanical, thermal, and crystallization behavior. Differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (XRD) demonstrated that the stereocomplex structures were still formed despite the added TPS and showed melting points ~55 °C higher than neat PLLA. Furthermore, stereocomplex crystallinity decreased with the increased TPS content. Dynamic mechanical analysis revealed that ST improved PLLA heat resistance, and tensile testing suggested that the TPS improved the elongation-at-break of ST. Moreover, the chain extender reduced the degradation of ST/TPS blends and generally improved ST/TPS composites’ mechanical properties.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Manufacturing and Materials Research Unit, Department of Manufacturing Engineering, Faculty of Engineering, Mahasarakham University, Mahasarakham 44150, Thailand.
- Department of Rubber and Polymer Technology, Faculty of Science and Technology, Rajabhat Mahasarakham University, Mahasarakham 44000, Thailand.
- Department of Chemistry, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand.
- Center of Excellence in Materials Science and Technology, Chiang Mai University, Chiang Mai 50200, Thailand.
- School of Industrial Education and Technology, King Mongkut's Institute of Technology Ladkrabang, Bangkok 10520, Thailand.
ORCID-Profile: Yottha Srithep, Patnarin Worajittiphon, John Morris
Förderung
- Mahasarakham University
- Faculty of Engineering, Mahasarakham University
Zitieren
APA
Srithep, Y., Pholharn, D., Worajittiphon, P., Sriprateep, K., Veang-In, O., & Morris, J. (2023). Toughening Polylactide Stereocomplex by Injection Molding with Thermoplastic Starch and Chain Extender. Polymers, 15(9), 2055. https://doi.org/10.3390/polym15092055
Vancouver
Srithep Y, Pholharn D, Worajittiphon P, Sriprateep K, Veang-In O, Morris J. Toughening Polylactide Stereocomplex by Injection Molding with Thermoplastic Starch and Chain Extender. Polymers. 2023;15(9):2055. doi:10.3390/polym15092055
BibTeX
@article{Srithep2023,
author = {Srithep, Yottha and Pholharn, Dutchanee and Worajittiphon, Patnarin and Sriprateep, Keartisak and Veang-In, Onpreeya and Morris, John},
title = {Toughening Polylactide Stereocomplex by Injection Molding with Thermoplastic Starch and Chain Extender},
journal = {Polymers},
year = {2023},
volume = {15},
number = {9},
pages = {2055},
doi = {10.3390/polym15092055}
}
EUVIMED