Effect of Tannins Addition on Thermal Stability of Furfurylated Wood
Polymers · 25.04.2023 · 15 (9) · 2044
DOI: 10.3390/polym15092044 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 25.04.2023. Verfasst von Mahdi Mubarok und 5 weiteren Autor:innen. Beteiligte Einrichtung: LERMAB (Laboratoire d'Etudes et de Recherche sur le Matériau Bois), Université de Lorraine, INRAE, 54000 Nancy, France. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Institut Carnot Énergie et Environnement en Lorraine, Agence Nationale de la Recherche, French National Research Agency (ANR).
Abstract (Originalsprache)
This article presents the effect of the addition of condensed tannins, used as a reticulation agent, on the polymerization of furfuryl alcohol during wood furfurylation, as well as the effect of these condensed tannins on the thermal stability of modified wood. Three kinds of dicarboxylic acids (adipic acid, succinic acid, and tartaric acid), as well as glyoxal, used as model of a wood reticulation agent, were used to catalyze the polymerization of furfuryl alcohol or tannin-furfuryl alcohol solutions. Impregnation of furfuryl alcohol or tannin-furfuryl alcohol solution into the wood, followed by curing at 103 °C for a specific duration, was performed for the wood modification. The thermal stability of the obtained tannin-furfuryl alcohol polymers and their corresponding modified woods was investigated. The leaching resistance and dimensional stability of the modified woods were also evaluated. Results indicated that the partial substitution of furfuryl alcohol by the tannins improved the polymerization reactivity in conditions where furfuryl alcohol alone did not lead to the formation of a solid polymeric material. The thermal stability and leaching resistance of the furfurylated wood in the presence of tannins were improved. Dimensional stability was also improved for furfurylated samples, but the effect of tannin addition was not so obvious, depending on the acidic catalyst used.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- LERMAB (Laboratoire d'Etudes et de Recherche sur le Matériau Bois), Université de Lorraine, INRAE, 54000 Nancy, France.
- Department of Forest Products, Faculty of Forestry and Environment, IPB University, Bogor 16680, Indonesia.
ORCID-Profile: Mahdi Mubarok, Stéphane Dumarçay
Förderung
- Institut Carnot Énergie et Environnement en Lorraine
- Agence Nationale de la Recherche
- French National Research Agency (ANR)
- “Institut Carnot Énergie et Environnement en Lorraine (ICÉEL)”
- Lab of Excellence ARBRE
Zitieren
APA
Mubarok, M., Azadeh, E., Obounou Akong, F., Dumarçay, S., Gérardin, P., & Gérardin-Charbonnier, C. (2023). Effect of Tannins Addition on Thermal Stability of Furfurylated Wood. Polymers, 15(9), 2044. https://doi.org/10.3390/polym15092044
Vancouver
Mubarok M, Azadeh E, Obounou Akong F, Dumarçay S, Gérardin P, Gérardin-Charbonnier C. Effect of Tannins Addition on Thermal Stability of Furfurylated Wood. Polymers. 2023;15(9):2044. doi:10.3390/polym15092044
BibTeX
@article{Mubarok2023,
author = {Mubarok, Mahdi and Azadeh, Elham and Obounou Akong, Firmin and Dumarçay, Stéphane and Gérardin, Philippe and Gérardin-Charbonnier, Christine},
title = {Effect of Tannins Addition on Thermal Stability of Furfurylated Wood},
journal = {Polymers},
year = {2023},
volume = {15},
number = {9},
pages = {2044},
doi = {10.3390/polym15092044}
}
EUVIMED