EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High Content of Thermoplastic Starch, Poly(butylenes adipate-co-terephthalate) and Poly(butylene succinate) Ternary Blends with a Good Balance in Strength and Toughness

Zhaoyang Niu, Fangping Chen, He Zhang, Changsheng Liu

Polymers · 25.04.2023 · 15 (9) · 2040

DOI: 10.3390/polym15092040 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 25.04.2023. Verfasst von Zhaoyang Niu und 3 weiteren Autor:innen. Beteiligte Einrichtung: Engineering Research Center for Biomedical Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237, Chin…. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shanghai Science and Technology Agriculture Project, National Natural Science Foundation of China, Shanghai Pujiang Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The ternary blends of a high content of thermoplastic starch (TPS), poly(butylenes adipate-co-terephthalate) (PBAT), and poly(butylene succinate) (PBS) were first melt-compounded in a twin screw extruder. The TPS contents in ternary blends were fixed at 60 wt%. The miscibility, morphology, thermal behavior, mechanical properties, and thermal resistance of the blends were investigated. The results showed that dispersions of PBS and PBAT minor phases improved the tensile strength and elongation at break. TPS/PBS/PBAT60/10/30 formed a good balance in strength and toughness. Dynamic mechanical analysis of the blends exhibits an intermediate and peak suggesting the ternary blend is compatible. Minor phase-separated structure SEM results showed that TPS/PBS/PBAT60/10/30 blend formed a typical mixture with core−shell morphology. As the PBAT composition was increased, phase morphology changes occurred in the blends, leading to decreased values of complex viscosity, storage modulus, and loss modulus. Moreover, the thermal resistances and melt flow properties of the materials were also studied by analysis of the heat deflection temperature (HDT) and melt flow index (MFI) value in the work.

Schlagwörter

Stichwörter der Autor:innen

high starch contentpoly(butylene succinate)poly(butylenes adipate-co-terephthalate)thermoplastic starch

Autor:innen und Institutionen

  • Engineering Research Center for Biomedical Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237, China.
  • Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, China.

Förderung

  • Shanghai Science and Technology Agriculture Project
  • National Natural Science Foundation of China
  • Shanghai Pujiang Program
  • Joint Fund for equipment pre-research of the ministry of education

Zitieren

APA

Niu, Z., Chen, F., Zhang, H., & Liu, C. (2023). High Content of Thermoplastic Starch, Poly(butylenes adipate-co-terephthalate) and Poly(butylene succinate) Ternary Blends with a Good Balance in Strength and Toughness. Polymers, 15(9), 2040. https://doi.org/10.3390/polym15092040

Vancouver

Niu Z, Chen F, Zhang H, Liu C. High Content of Thermoplastic Starch, Poly(butylenes adipate-co-terephthalate) and Poly(butylene succinate) Ternary Blends with a Good Balance in Strength and Toughness. Polymers. 2023;15(9):2040. doi:10.3390/polym15092040

BibTeX
@article{Niu2023,
  author = {Niu, Zhaoyang and Chen, Fangping and Zhang, He and Liu, Changsheng},
  title = {High Content of Thermoplastic Starch, Poly(butylenes adipate-co-terephthalate) and Poly(butylene succinate) Ternary Blends with a Good Balance in Strength and Toughness},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {9},
  pages = {2040},
  doi = {10.3390/polym15092040}
}
Kostenlos starten →