EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polyketone-Based Anion-Exchange Membranes for Alkaline Water Electrolysis

Ottavia Racchi, Rebecca Baldassari, Esteban Araya-Hermosilla iD, Virgilio Mattoli iD, Pierpaolo Minei, Alfonso Pozio iD, Andrea Pucci iD

Polymers · 25.04.2023 · 15 (9) · 2027

DOI: 10.3390/polym15092027 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 25.04.2023. Verfasst von Ottavia Racchi und 6 weiteren Autor:innen. Beteiligte Einrichtung: Dipartimento di Chimica e Chimica Industriale, Università di Pisa, Via Moruzzi, 13, 56124 Pisa, Italy. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Economic Development.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Anion-exchange membranes (AEMs) are involved in a wide range of applications, including fuel cells and water electrolysis. A straightforward method for the preparation of efficient AEMs consists of polymer functionalization with robust anion-exchange sites. In this work, an aliphatic polyketone was functionalized with 1-(3-aminopropyl)imidazole through the Paal–Knorr reaction, with a carbonyl (CCO %) conversion of 33%. The anion-exchange groups were generated by the imidazole quaternization by using two different types of alkyl halides, i.e., 1,4-iodobutane and 1-iodobutane, with the aim of modulating the degree of crosslinking of the derived membrane. All of the membranes were amorphous (Tg ∼ 30 °C), thermally resistant up to 130 °C, and had a minimum Young’s modulus of 372 ± 30 MPa and a maximum of 86 ± 5 % for the elongation at break for the least-crosslinked system. The ionic conductivity of the AEMs was determined at 25 °C by electrochemical impedance spectroscopy (EIS), with a maximum of 9.69 mS/cm, i.e., comparable with that of 9.66 mS/cm measured using a commercially available AEM (Fumasep-PK-130). Future efforts will be directed toward increasing the robustness of these PK-based AEMs to meet all the requirements needed for their application in electrolytic cells.

Schlagwörter

Stichwörter der Autor:innen

Paal–Knorranion-exchange membranemembranespolyketonequaternary ammoniumwater electrolysis

Autor:innen und Institutionen

  • Dipartimento di Chimica e Chimica Industriale, Università di Pisa, Via Moruzzi, 13, 56124 Pisa, Italy.
  • Center for Materials Interfaces @SSSA, Istituto Italiano di Tecnologia, Viale Rinaldo Piaggio, 34, 56025 Pontedera, Italy.
  • SPIN-PET, Via R Piaggio, 32, 56025 Pontedera, Italy.
  • ENEA CR Casaccia, Via Anguillarese, 301, 00123 Rome, Italy.
  • CISUP, Centro per l'Integrazione della Strumentazione dell'Università di Pisa, Lungarno Pacinotti, 43, 56126 Pisa, Italy.

ORCID-Profile: Esteban Araya-Hermosilla, Virgilio Mattoli, Alfonso Pozio, Andrea Pucci

Förderung

  • Ministry of Economic Development

Zitieren

APA

Racchi, O., Baldassari, R., Araya-Hermosilla, E., Mattoli, V., Minei, P., Pozio, A., & Pucci, A. (2023). Polyketone-Based Anion-Exchange Membranes for Alkaline Water Electrolysis. Polymers, 15(9), 2027. https://doi.org/10.3390/polym15092027

Vancouver

Racchi O, Baldassari R, Araya-Hermosilla E, Mattoli V, Minei P, Pozio A, et al. Polyketone-Based Anion-Exchange Membranes for Alkaline Water Electrolysis. Polymers. 2023;15(9):2027. doi:10.3390/polym15092027

BibTeX
@article{Racchi2023,
  author = {Racchi, Ottavia and Baldassari, Rebecca and Araya-Hermosilla, Esteban and Mattoli, Virgilio and Minei, Pierpaolo and Pozio, Alfonso and Pucci, Andrea},
  title = {Polyketone-Based Anion-Exchange Membranes for Alkaline Water Electrolysis},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {9},
  pages = {2027},
  doi = {10.3390/polym15092027}
}
Kostenlos starten →