EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Fusion Temperature on Nonisothermal Crystallization Kinetics of Polyamide 6

Ahmed Nasr iD, Petr Svoboda iD

Polymers · 20.04.2023 · 15 (8) · 1952

DOI: 10.3390/polym15081952 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 20.04.2023. Verfasst von Ahmed Nasr und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Polymer Engineering, Faculty of Technology, Tomas Bata, University in Zlin, Vavreckova 5669, 76001 Zlin, Czech Republic. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Tomas Bata University in Zlín, Internal Grant Agency of the Faculty of Technology, Tomas Bata University in Zlin.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect of fusion temperature and duration on the nonisothermal crystallization kinetics of polyamide 6 (PA6) was investigated using differential scanning calorimetry (DSC) and a polarized optical microscope (OM). The rapid cooling method involved heating the polymer above its melting point, holding it at this temperature to ensure complete melting, and then rapidly cooling it to the crystallization temperature. By monitoring the heat flow during cooling, the crystallization kinetics of PA6 were characterized, including the degree of crystallinity, crystallization temperature, and crystallization rate. The study found that changing the fusion temperature and duration significantly impacted the crystallization kinetics of PA6. Increasing the fusion temperature decreased the degree of crystallinity, with smaller nucleation centers requiring a higher degree of supercooling for crystallization. The crystallization temperature shifted towards lower temperatures, and the crystallization kinetics slowed down. The study also found that lengthening the fusion time raised the relative crystallinity, but any further increase did not result in a significant change. The study showed that an increase in fusion temperature led to a longer time needed to reach a given level of crystallinity, reducing the crystallization rate. This can be explained by the thermodynamics of the crystallization process, where higher temperatures promote molecular mobility and crystal growth. Moreover, the study revealed that decreasing a polymer’s fusion temperature can lead to a greater degree of nucleation and faster growth of the crystalline phase, which can significantly impact the values of the Avrami parameters used to characterize the crystallization kinetics.

Schlagwörter

Stichwörter der Autor:innen

DSCcooling functionfusion temperaturenonisothermal crystallizationoptical microscopepolyamide 6

Autor:innen und Institutionen

  • Department of Polymer Engineering, Faculty of Technology, Tomas Bata, University in Zlin, Vavreckova 5669, 76001 Zlin, Czech Republic.

ORCID-Profile: Ahmed Nasr, Petr Svoboda

Förderung

  • Tomas Bata University in Zlín
  • Internal Grant Agency of the Faculty of Technology, Tomas Bata University in Zlin

Zitieren

APA

Nasr, A., & Svoboda, P. (2023). Influence of Fusion Temperature on Nonisothermal Crystallization Kinetics of Polyamide 6. Polymers, 15(8), 1952. https://doi.org/10.3390/polym15081952

Vancouver

Nasr A, Svoboda P. Influence of Fusion Temperature on Nonisothermal Crystallization Kinetics of Polyamide 6. Polymers. 2023;15(8):1952. doi:10.3390/polym15081952

BibTeX
@article{Nasr2023,
  author = {Nasr, Ahmed and Svoboda, Petr},
  title = {Influence of Fusion Temperature on Nonisothermal Crystallization Kinetics of Polyamide 6},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {8},
  pages = {1952},
  doi = {10.3390/polym15081952}
}
Kostenlos starten →