EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

The Additive Manufacturing Approach to Polydimethylsiloxane (PDMS) Microfluidic Devices: Review and Future Directions

Anthony Tony, Ildiko Badea iD, Chun Yang iD, Yuyi Liu, Garth Wells, Kemin Wang, Ruixue Yin iD, Hongbo Zhang iD, Wenjun Zhang iD

Polymers · 18.04.2023 · 15 (8) · 1926

DOI: 10.3390/polym15081926 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 18.04.2023. Verfasst von Anthony Tony und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, SK S7N 5A9, Canada. Die Arbeit wurde bisher 117-mal zitiert (Crossref) und nennt 136 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NSERC (Natural Sciences and Engineering Research Council of Canada) CREATE (Collaborative Research and Training Experience).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a comprehensive review of the literature for fabricating PDMS microfluidic devices by employing additive manufacturing (AM) processes. AM processes for PDMS microfluidic devices are first classified into (i) the direct printing approach and (ii) the indirect printing approach. The scope of the review covers both approaches, though the focus is on the printed mold approach, which is a kind of the so-called replica mold approach or soft lithography approach. This approach is, in essence, casting PDMS materials with the mold which is printed. The paper also includes our on-going effort on the printed mold approach. The main contribution of this paper is the identification of knowledge gaps and elaboration of future work toward closing the knowledge gaps in fabrication of PDMS microfluidic devices. The second contribution is the development of a novel classification of AM processes from design thinking. There is also a contribution in clarifying confusion in the literature regarding the soft lithography technique; this classification has provided a consistent ontology in the sub-field of the fabrication of microfluidic devices involving AM processes.

Schlagwörter

Stichwörter der Autor:innen

3D printingmicrofabricationmicrofluidicspolydimethylsiloxanepost treatment

Autor:innen und Institutionen

  • Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, SK S7N 5A9, Canada.
  • College of Pharmacy and Nutrition, University of Saskatchewan, Saskatoon, SK S7N 5E5, Canada.
  • Synchrotron Laboratory for Micro and Nano Devices (SyLMAND), Canadian Light Source, Saskatoon, SK S7N 2V3, Canada.
  • School of Mechatronics and Automation, Shanghai University, Shanghai 200444, China.
  • School of Mechanical and Power Engineering, East China University of Science and Technology, Shanghai 200237, China.

ORCID-Profile: Ildiko Badea, Chun Yang, Ruixue Yin, Hongbo Zhang, Wenjun Zhang

Förderung

  • NSERC (Natural Sciences and Engineering Research Council of Canada) CREATE (Collaborative Research and Training Experience)

Zitieren

APA

Tony, A., Badea, I., Yang, C., Liu, Y., Wells, G., Wang, K., Yin, R., Zhang, H., & Zhang, W. (2023). The Additive Manufacturing Approach to Polydimethylsiloxane (PDMS) Microfluidic Devices: Review and Future Directions. Polymers, 15(8), 1926. https://doi.org/10.3390/polym15081926

Vancouver

Tony A, Badea I, Yang C, Liu Y, Wells G, Wang K, et al. The Additive Manufacturing Approach to Polydimethylsiloxane (PDMS) Microfluidic Devices: Review and Future Directions. Polymers. 2023;15(8):1926. doi:10.3390/polym15081926

BibTeX
@article{Tony2023,
  author = {Tony, Anthony and Badea, Ildiko and Yang, Chun and Liu, Yuyi and Wells, Garth and Wang, Kemin and Yin, Ruixue and Zhang, Hongbo and Zhang, Wenjun},
  title = {The Additive Manufacturing Approach to Polydimethylsiloxane (PDMS) Microfluidic Devices: Review and Future Directions},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {8},
  pages = {1926},
  doi = {10.3390/polym15081926}
}
Kostenlos starten →