EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Utilizing Robust Design to Optimize Composite Bioadhesive for Promoting Dermal Wound Repair

Rattapol Pinnaratip iD, Zhongtian Zhang, Ariana Smies, Pegah Kord Forooshani, Xiaoqing Tang, Rupak M Rajachar iD, Bruce P Lee iD

Polymers · 15.04.2023 · 15 (8) · 1905

DOI: 10.3390/polym15081905 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 15.04.2023. Verfasst von Rattapol Pinnaratip und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Michigan Technological University, Houghton, MI 49931, USA. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIDDK NIH HHS, NIH HHS, NIGMS NIH HHS.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Catechol-modified bioadhesives generate hydrogen peroxide (H2O2) during the process of curing. A robust design experiment was utilized to tune the H2O2 release profile and adhesive performance of a catechol-modified polyethylene glycol (PEG) containing silica particles (SiP). An L9 orthogonal array was used to determine the relative contributions of four factors (the PEG architecture, PEG concentration, phosphate-buffered saline (PBS) concentration, and SiP concentration) at three factor levels to the performance of the composite adhesive. The PEG architecture and SiP wt% contributed the most to the variation in the results associated with the H2O2 release profile, as both factors affected the crosslinking of the adhesive matrix and SiP actively degraded the H2O2. The predicted values from this robust design experiment were used to select the adhesive formulations that released 40–80 µM of H2O2 and evaluate their ability to promote wound healing in a full-thickness murine dermal wound model. The treatment with the composite adhesive drastically increased the rate of the wound healing when compared to the untreated controls, while minimizing the epidermal hyperplasia. The release of H2O2 from the catechol and soluble silica from the SiP contributed to the recruitment of keratinocytes to the wound site and effectively promoted the wound healing.

Schlagwörter

Stichwörter der Autor:innen

catechol-based adhesivedermal wound repairhydrogen peroxiderobust designsilica particle

Autor:innen und Institutionen

  • Department of Biomedical Engineering, Michigan Technological University, Houghton, MI 49931, USA.
  • Department of Biological Sciences, Life Science and Technology Institute, Michigan Technological University, Houghton, MI 49931, USA.
  • Marine Ecology and Telemetry Research (MarEcoTel), Seabeck, WA 98380, USA.

ORCID-Profile: Rattapol Pinnaratip, Rupak M Rajachar, Bruce P Lee

Förderung

  • NIDDK NIH HHS
  • NIH HHS
  • NIGMS NIH HHS
  • National Institutes of Health
  • National Science Foundation
  • Office of Naval Research

Zitieren

APA

Pinnaratip, R., Zhang, Z., Smies, A., Forooshani, P. K., Tang, X., Rajachar, R. M., & Lee, B. P. (2023). Utilizing Robust Design to Optimize Composite Bioadhesive for Promoting Dermal Wound Repair. Polymers, 15(8), 1905. https://doi.org/10.3390/polym15081905

Vancouver

Pinnaratip R, Zhang Z, Smies A, Forooshani PK, Tang X, Rajachar RM, et al. Utilizing Robust Design to Optimize Composite Bioadhesive for Promoting Dermal Wound Repair. Polymers. 2023;15(8):1905. doi:10.3390/polym15081905

BibTeX
@article{Pinnaratip2023,
  author = {Pinnaratip, Rattapol and Zhang, Zhongtian and Smies, Ariana and Forooshani, Pegah Kord and Tang, Xiaoqing and Rajachar, Rupak M and Lee, Bruce P},
  title = {Utilizing Robust Design to Optimize Composite Bioadhesive for Promoting Dermal Wound Repair},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {8},
  pages = {1905},
  doi = {10.3390/polym15081905}
}
Kostenlos starten →