EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Thermo-Mechanical Characteristics of Composites Based on Epoxy Resin with Kaolinite and Clinoptilolite

Andrzej Puszka iD, Marcin Kneć iD, Wojciech Franus iD, Beata Podkościelna iD

Polymers · 15.04.2023 · 15 (8) · 1898

DOI: 10.3390/polym15081898 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 15.04.2023. Verfasst von Andrzej Puszka und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Polymer Chemistry, Institute of Chemical Sciences, Faculty of Chemistry, Maria Curie-Skłodowska University, M. Curie-Skłodowska Sq.3., …. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Herein the synthesis, characterization, and study of spectroscopic, thermal, and thermo-mechanical properties of polymeric composites are presented. The composites were obtained in special molds (8 × 10 cm) based on the commercially available epoxy resin Epidian® 601 cross-linked by 10% w/w triethylenetetramine (TETA). To improve the thermal and mechanical properties of the synthetic epoxy resins, natural fillers in the form of minerals from the silicate cluster kaolinite (KA) or clinoptilolite (CL) were added to the composites. The structures of the materials obtained were confirmed by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR/FTIR). The thermal properties of the resins were investigated by differential scanning calorimetry (DSC) and dynamic-mechanical analysis (DMA) in an inert atmosphere. The hardness of the crosslinked products was determined using the Shore D method. Moreover, strength tests were performed on the 3PB (three-point bending) specimen, with the analysis of tensile strains conducted using the Digital Image Correlation (DIC) technique.

Schlagwörter

Stichwörter der Autor:innen

crosslinkingepoxy resinmechanical propertiesnatural fillersthermal properties

Autor:innen und Institutionen

  • Department of Polymer Chemistry, Institute of Chemical Sciences, Faculty of Chemistry, Maria Curie-Skłodowska University, M. Curie-Skłodowska Sq.3., 20-031 Lublin, Poland.
  • Laboratory of Construction, Faculty of Civil Engineering and Architecture, Lublin University of Technology, 40 Nadbystrzycka St., 20-618 Lublin, Poland.
  • Department of Construction Materials Engineering and Geoengineering, Faculty of Civil Engineering and Architecture, Lublin University of Technology, 20-618 Lublin, Poland.

ORCID-Profile: Andrzej Puszka, Marcin Kneć, Wojciech Franus, Beata Podkościelna

Zitieren

APA

Puszka, A., Kneć, M., Franus, W., & Podkościelna, B. (2023). Preparation and Thermo-Mechanical Characteristics of Composites Based on Epoxy Resin with Kaolinite and Clinoptilolite. Polymers, 15(8), 1898. https://doi.org/10.3390/polym15081898

Vancouver

Puszka A, Kneć M, Franus W, Podkościelna B. Preparation and Thermo-Mechanical Characteristics of Composites Based on Epoxy Resin with Kaolinite and Clinoptilolite. Polymers. 2023;15(8):1898. doi:10.3390/polym15081898

BibTeX
@article{Puszka2023,
  author = {Puszka, Andrzej and Kneć, Marcin and Franus, Wojciech and Podkościelna, Beata},
  title = {Preparation and Thermo-Mechanical Characteristics of Composites Based on Epoxy Resin with Kaolinite and Clinoptilolite},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {8},
  pages = {1898},
  doi = {10.3390/polym15081898}
}
Kostenlos starten →